|
|
Joined: Jan 2005
Posts: 6
Member
|
OP
Member
Joined: Jan 2005
Posts: 6 |
Can I use DISA on a XTS system on CO line 6 of 6 to allow the caller direct access to his secretary without going through the secretary that normally answers the incoming calls?
If yes how do I do this. I have a manual but have no expreience in programming this system.
Thanks in advance,
Tom
|
|
|
|
|
Joined: Dec 2001
Posts: 352
Member
|
|
Member
Joined: Dec 2001
Posts: 352 |
You need to setup the co for a disa call. Section 40 button 7. Set it for 24 hour. When you call into that line you must enter the DISA default password; then you get an intercom dial tone. Then just dial the extension number of who you want to reach.
It is possible, you are just using line 6 for DISA use only then.
Tip and ring, the work of the devil!
|
|
|
|
|
Joined: Aug 2003
Posts: 5,149
Moderator-Vertical, Vodavi
|
|
Moderator-Vertical, Vodavi
Joined: Aug 2003
Posts: 5,149 |
Is this the only application you want to use the DISA for? If so, why not have the line just directly ring the secretary's phone?
|
|
|
|
Forums84
Topics93,877
Posts636,993
Members49,670
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (Touch Tone Tommy),
147
guests, and
15
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
