|
|
|
|
Joined: Jan 2005
Posts: 6
Member
|
|
Member
Joined: Jan 2005
Posts: 6 |
Can I use DISA on a XTS system on CO line 6 of 6 to allow the caller direct access to his secretary without going through the secretary that normally answers the incoming calls?
If yes how do I do this. I have a manual but have no expreience in programming this system.
Thanks in advance,
Tom
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Dec 2001
Posts: 352
Member
|
|
Member
Joined: Dec 2001
Posts: 352 |
You need to setup the co for a disa call. Section 40 button 7. Set it for 24 hour. When you call into that line you must enter the DISA default password; then you get an intercom dial tone. Then just dial the extension number of who you want to reach.
It is possible, you are just using line 6 for DISA use only then.
Tip and ring, the work of the devil!
|
|
|
|
|
Joined: Aug 2003
Posts: 5,155 Likes: 5
Moderator-Vertical, Vodavi
|
|
Moderator-Vertical, Vodavi
Joined: Aug 2003
Posts: 5,155 Likes: 5 |
Is this the only application you want to use the DISA for? If so, why not have the line just directly ring the secretary's phone?
|
|
|
|
Forums84
Topics94,526
Posts640,017
Members49,852
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
281
guests, and
43
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
