|
|
Joined: Jun 2008
Posts: 69
Member
|
OP
Member
Joined: Jun 2008
Posts: 69 |
Looking for help on the starplus triad systems and rauland telecenter. Have one that the cmos battery died. Have be able to rebuild most of the programming. Unit used 4 digit exts. Can not call rauland exts directly, have do dial 82 for group 2 for the tie lines. Can not fine any info in them.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Dec 2001
Posts: 352
Member
|
|
Member
Joined: Dec 2001
Posts: 352 |
What are you asking? I am not familiar with Rauland but what are you trying to do?
Are you setting it up as extensions or co lines? Are you wanting to send inband info to the Rauland?
Tip and ring, the work of the devil!
|
|
|
|
|
Joined: Jan 2005
Posts: 15,378 Likes: 13
Moderator-Vertical, Vodavi, 1A2, Outside Wire
|
|
Moderator-Vertical, Vodavi, 1A2, Outside Wire
Joined: Jan 2005
Posts: 15,378 Likes: 13 |
In order to provide full integration with the Rauland-Borg Telecenter, you must have the optional KSU software that provides this functionality. Also, the CO lines associated need to be set for DISA type 5. Also, is the serial port between the systems set up and configured for the proper baud rate so that they match?
If this is an XTS, you'll need to get the system's ESN and contact inside sales at Vertical to obtain the replacement software key code. If it is an older system, you'll need the chips that contain this software (you should be able to use the ones from the PMU of the old card if you still have it).
Ed Vaughn, MBSWWYPBX
|
|
|
|
Forums84
Topics94,284
Posts638,769
Members49,765
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (James D.),
75
guests, and
300
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
