|
|
Joined: Jan 2005
Posts: 15,402 Likes: 18
Moderator-Vertical, Vodavi, 1A2, Outside Wire
|
|
Moderator-Vertical, Vodavi, 1A2, Outside Wire
Joined: Jan 2005
Posts: 15,402 Likes: 18 |
I have a customer who would like to tie one of their XTS nodes to a Shoretel "system" at a remote location in Texas via IP.
The hub system is a Triad 3, so IP networking from the hub is out of the question. What they are asking us to do is to put an IP card in one of their local nodes that will provide trunking to the Shoretel.
They want to have station-to-station dialing, basically networking without really being networked. They also want to route outward calling in Texas through the XTS node here. They have accepted the fact that we may have to provide trunking in two different directions. Since I don't know anything about the Shoretel equipment, I really can't say for sure that we can even accomplish this.
What they are basically asking for is to use a Shortel system as a networked node. Does any body know if this will even work, and if so, what limitations we'll be facing?
Ed Vaughn, MBSWWYPBX
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jan 2008
Posts: 3,821
Retired Moderator
|
|
Retired Moderator
Joined: Jan 2008
Posts: 3,821 |
I don't thing there is anyway to have transparent extension dialing. You might be able to access a trunk then dial the extension but I doubt that as well. I think it would work more like a standard ip phone, such as a Polycom, you program the ip and it rings into the operator. Other than that you are not going to get much. Vodavi voip net config will only talk to other Vodavis so tech service has informed me.
www.myrandomviews "Old phone guys never die, they just get locked in some closet with an old phone system and forgotten about" Retired, taking photographs and hoping to fly one of my many kites.
|
|
|
|
|
Joined: Feb 2009
Posts: 3,136
Moderator-Vodavi, Vertical, XBlue
|
|
Moderator-Vodavi, Vertical, XBlue
Joined: Feb 2009
Posts: 3,136 |
Lowest common denominator here. Use something like the Multi-Tech VoIP FX at each end. One tied to a single line port and the other to a loop start CO port.
- Dave S. -
You can never appease your ideologue opponents.
|
|
|
|
|
Joined: Dec 2005
Posts: 651 Likes: 1
Member
|
|
Member
Joined: Dec 2005
Posts: 651 Likes: 1 |
Maybe use the vodavi voip express box's? Or maybe a Quintum? I'm like you, I have no idea how a shoretel functions.
"I thought I was wrong once, but I was mistaken"
|
|
|
|
|
Joined: Aug 2003
Posts: 5,155 Likes: 5
Moderator-Vertical, Vodavi
|
|
Moderator-Vertical, Vodavi
Joined: Aug 2003
Posts: 5,155 Likes: 5 |
I suppose it may be possible to connect to the Shortel via SIP with the new 4.0 software on the XTS, if you have a separate VoIP card just for this purpose. Of course that would require some experimentation.
Perhaps the Shortel people could provide an ATA on your end that you could tie into open CO ports. Perhaps you could do some fancy DISA setup and route calls through your system?
Otherwise, I would vote for the Multi-Tech option as well.
|
|
|
|
Forums84
Topics94,527
Posts640,018
Members49,852
| |
Most Online5,661
May 23rd, 2018
|
|
|
2 members (R4+Z, JBean3329),
444
guests, and
57
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
