sundance-communications.com/forum Forums TDM Business Telephone Systems Vodavi Telephones & Systems DHS-E line assignment question

There ya go....I thought the DHS & DHS-E were the same manual. Systemitch---you should be good to go, then.

Does any know the actual feature code? The PDF's take a wile to down load & it's hard to tell witch one is right till you download it.

Thanks

Ya I don't know the book says I should have a "soft button" "co ln" I only get 2 choices "sta" & "feat" The phone has a display so it should be a "executive Model" so I'm at a loss. I guess for some reason this can't be done.

Try putting the CO line code in the "Sta". See what happens. Are you sure it isn't saying "Dir" & "Feat"??

To program a CO button: (DHS-E only)
1. Dial [1] + line number.
2. Press [HOLD]

When you go into programming (without spelling out the password) are you using 0's or #'s?

RWRacedog
I will have to go back to that office to check to see if it was "dir" & "feat" that sounds like you may be on to something. what would that mean if it was "dir"? I think it is dir I thought if I went to "feat" I could put it in with a F-code but couldn't find one that works.

nfcphoneman
once I do the "feat""#3" i get the soft keys & it doesn't seen to take the
1. Dial [1] + line number.
2. Press [HOLD]

Oldh2oSkier
The Database Programming password uses 0's not #'s
But no password is required to get into get into the phone/Flexible button programming

Thanks

Then you have a DHS-E system and you would use DIR which stands for directory number which is what the 701, 702 are.

I am trying to locate dial for the Vodavi 1414-71 phones.

Thank You
Harley Man

sorry make tahat dial pads.