|
|
|
|
Joined: Dec 2009
Posts: 5
Member
|
|
Member
Joined: Dec 2009
Posts: 5 |
Inskin flash based voicemail was using outcall to notify user. Recently mandatory 10 digit dialing caused this to stop working. I've programed in the correct number and verified it can be dialed from a telephone on the system. I also noticed that I can't dial an 11 digit long distance number using outcall notification. Ports 4 and 8 are outcall allowed. Both ports are COS 1, have access to line group 1. I've removed all lines from line group 1 that are not in service. Any suggestions??
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jan 2005
Posts: 340
Member
|
|
Member
Joined: Jan 2005
Posts: 340 |
in the flash voicemail you have to insert several pauses after the number, otherwise the vm system will dial the number then disconnect.
|
|
|
|
|
Joined: Dec 2005
Posts: 651 Likes: 1
Member
|
|
Member
Joined: Dec 2005
Posts: 651 Likes: 1 |
Have you put a butt set on the last line in the outdial line group and listened to how many digits the vm is dialing? I'm unaware of any outdial restrictions in the flash voice mail. The newer version of flash vm's will notify a cell or land line and allow you to check the message, but the older versions would only spit digits or silence in your ear as it was set up for beeper notification only. Also , I've put pauses on the old versions after the number but not before.
"I thought I was wrong once, but I was mistaken"
|
|
|
|
|
Joined: Dec 2009
Posts: 5
Member
|
|
Member
Joined: Dec 2009
Posts: 5 |
|
|
|
|
Forums84
Topics94,580
Posts640,268
Members49,879
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
|
|
