|
Joined: Dec 2003
Posts: 7
Member
|
Member
Joined: Dec 2003
Posts: 7 |
Wondering if anyone has a Cortelco Millennium manual PDF or better yet a copy of "Millennium Assistant"? It is the administration software for a Cortelco (now called eON Communications) Millennium. any help is greatly appriceated! Kevin 888-511-1588 [email protected]
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Mar 2004
Posts: 880 Likes: 1
Member
|
Member
Joined: Mar 2004
Posts: 880 Likes: 1 |
I have worked on the Millennium extensively for the last 12 years. I will email you a Millennium manual, but I do not have any information on the Assistant. We actually developed a better alternative to the Assistant - EzAdmin. Its a Window-based programming interface for this switch.
[This message has been edited by dwflood (edited March 23, 2005).]
|
1 member likes this:
Daniel Trentham |
|
|
|
Joined: Aug 2005
Posts: 2
Member
|
Member
Joined: Aug 2005
Posts: 2 |
We recently met with a school who's vendor went out of business. They have a cortelco Millennium 32, which we have not a clue how to approach.
Following a storm, some digital and analog station have significant static, and what appears to be a ground hum. CO lines check fine @ Demarc.
Any manuals, or ideas where to look would be great. We support their IT services, but usually work with Nortel or Avaya in voice land. Being a school, we are trying to help them out, without getting in over our heads!
|
|
|
|
Joined: Mar 2004
Posts: 880 Likes: 1
Member
|
Member
Joined: Mar 2004
Posts: 880 Likes: 1 |
<font face="Verdana, Arial" size="2">Originally posted by cfinley: We recently met with a school who's vendor went out of business. They have a cortelco Millennium 32, which we have not a clue how to approach. </font> 'Millennium 32' also known as the Millennium Compact, which is the flat-pack version of this switch. It has a motherboard and a small card-cage to accept up to eight boards? Unfortunatly by the nature of a flat pack, when things go bad parts can't be switched out. Often the whole thing would have to be repaired/replaced. Bad static system-wide could be things such as the power supply, a single bad interface card, motherboard, bus terminator, etc. 'Static' in a 4-wire ISDN phone is often actually line signal errors due to a bad line cord or problems in the wiring. I'll see if I have a .pdf manual for the compact. Good luck! [This message has been edited by dwflood (edited August 12, 2005).]
|
|
|
|
Joined: Aug 2005
Posts: 2
Member
|
Member
Joined: Aug 2005
Posts: 2 |
[QUOTE]Originally posted by dwflood: [B] 'Millennium 32' also known as the Millennium Compact, which is the flat-pack version of this switch. It has a motherboard and a small card-cage to accept up to eight boards?
DW-- Thanks so much for the quick response. The backplane on the installed system looks to have 5 smaller motherboards with a ribbon cable connecting each one. The small card frame (as you mentioned) runs down the right side, and has about 14 cards total. As mentioned, we know nothing about this system.
The power supply was a good thought we overlooked. May see if we can find a quick swap for that. If you have the manual, or directions on obtaining one, that would be great.
Any Avaya questions-- certainly forward them my way!!
Thanks again!
|
|
|
|
Joined: Mar 2004
Posts: 880 Likes: 1
Member
|
Member
Joined: Mar 2004
Posts: 880 Likes: 1 |
Yeah, thats the Millennium Compact. Sounds like what you have has been expanded to 64 ports (vs. 1024 ports for the full version).
The problem with the Compact is it is hardware is different from the full version Millennium. Early versions (early to mid 90's) were very problematic. The power supply on the Compact is integrated into the motherboard unfortunately.
Hardware issues aside, the Compact shares the power and flexibility of the Millennium and can be a great solution for any installation.
[This message has been edited by dwflood (edited August 13, 2005).]
|
|
|
|
Joined: Aug 2005
Posts: 1
Member
|
Member
Joined: Aug 2005
Posts: 1 |
Hi, I'm trying to find a manual for a cortelco millenium system... dbcs-8/16 model number... anyone got anything would be very very helpful
|
|
|
|
Joined: Feb 2005
Posts: 1,018
Member
|
Member
Joined: Feb 2005
Posts: 1,018 |
I just hauled one of the compacts to the landfill. I could not find anyone interested in taking it off my hands.
------------------
|
|
|
|
Joined: Oct 2006
Posts: 8
Member
|
Member
Joined: Oct 2006
Posts: 8 |
Originally posted by MARK3906: I just hauled one of the compacts to the landfill. I could not find anyone interested in taking it off my hands. Hey Mark, I stumbled into this forum doing a Google search looking for parts for one of those beasts. Next time, drop me a line and save the gas. Seriously, I got involved with this equipment against my will but after a few years, I liked it. It works well if you install it right and think before you program.
No matter how cynical I am, I just can't seem to keep up!
|
|
|
Forums84
Topics94,526
Posts640,015
Members49,852
|
Most Online5,661 May 23rd, 2018
|
|
|
|