|
|
|
|
Joined: Feb 2007
Posts: 100
Member
|
|
Member
Joined: Feb 2007
Posts: 100 |
The decision has been made by management to go from a 99% Nortel telephone network to Cisco. As a result I've been encountering a slew of new issues to troubleshoot.
The latest is a buggy phone system at one location. All incoming calls are directed to one of 6 available buttons on the operators console. The operator answers all the calls and then directs them onward. Now the fun part: sometimes on transfer the call disconnect as the person at the extension picks up, sometimes it transfers fine. The issue doesn't seem to be specific to any line or extension in particular. It will work fine for a few days than just start out of the blue (as per the EU's on site), and then just start working again later in the day. Was going to run a trace, but always seems to work fine when I'm calling in from outside. Just wondering if anyone might have heard of anything similar w/ these phones.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jan 2002
Posts: 2,328
Moderator-Comdial
|
|
Moderator-Comdial
Joined: Jan 2002
Posts: 2,328 |
I don't know if you're going to get many responses here but would you keep the board informed as to the resolution of your problem.
|
|
|
|
|
Joined: Feb 2007
Posts: 100
Member
|
|
Member
Joined: Feb 2007
Posts: 100 |
Will do. I updated the firmware on the phone earlier today so I'm waiting to have the phone in use a couple of days to see if that corrects the issue.
|
|
|
|
Forums84
Topics94,557
Posts640,129
Members49,862
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
48
guests, and
54
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
