|
Joined: Jun 2004
Posts: 36
Member
|
OP
Member
Joined: Jun 2004
Posts: 36 |
Is there a way to clear the CID history under the Directory button on DTH phones hooked up to an Elite IPK?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Nov 2003
Posts: 1,313
Member
|
Member
Joined: Nov 2003
Posts: 1,313 |
never had anyone ask that. i'm guessing if you disconnect the battery on the mifm card then hit the reset button on it would clear it.
NOTE!!!!!!!!! if you have lcr programmed or if you even think you have lcr set do NOT do this!
|
|
|
|
Joined: Jun 2004
Posts: 36
Member
|
OP
Member
Joined: Jun 2004
Posts: 36 |
I'd rather not try that. Also, that would effect all the phones though, what about just one? Any other ideas?
|
|
|
|
Joined: Nov 2003
Posts: 1,313
Member
|
Member
Joined: Nov 2003
Posts: 1,313 |
you're right about effecting all phones. not really sure if there is a way to clear a single ext.
doc? anyone?
|
|
|
|
Joined: Aug 2004
Posts: 44
Member
|
Member
Joined: Aug 2004
Posts: 44 |
<font face="Verdana, Arial" size="2">Originally posted by chrislebeck: you're right about effecting all phones. not really sure if there is a way to clear a single ext. doc? anyone?</font> Chris: Not sure if this might be the answer ... Depending on if you want this available system wide or per phone, you'd set MB 2-05 to TNAT (Tenant Wide Mode) which is LK1, or to TEL (Telephone Mode) which is LK2. Line Key Selection for Tenant Mode General Description: Use this Memory Block to assign functions to each CO/PBX line key on each telephone in a tenant specified as Tenant Mode in Memory Block 2-05 (Line Key Selection). Settings page 2, LK14 = on/off. This is in the IPK Programming Manual (Rev 1) 2-372 Correct me if I'm wrong, I'm not the hardware side of NEC. :P Reading that log on/off would mean to record ANI info that passes from the KSU correct? ------------------ NEC Unified Solutions / Voice Mail and Unified Messaging | Active Voice, LLC
|
|
|
|
Joined: Nov 2003
Posts: 1,313
Member
|
Member
Joined: Nov 2003
Posts: 1,313 |
nope..good guess tho
the log on/off button is to log in/out of an acd group
|
|
|
|
Joined: Jun 2004
Posts: 36
Member
|
OP
Member
Joined: Jun 2004
Posts: 36 |
I'll take it there's no way then huh? Where's that stuff stored? Is it in the phone itself? Is it port specific, extension specific?
|
|
|
|
Joined: Nov 2003
Posts: 1,313
Member
|
Member
Joined: Nov 2003
Posts: 1,313 |
should be stored in the mifm card
|
|
|
|
Joined: Aug 2004
Posts: 44
Member
|
Member
Joined: Aug 2004
Posts: 44 |
<font face="Verdana, Arial" size="2">Originally posted by chrislebeck: should be stored in the mifm card</font> Checked with KSU side of NTAC. Only way to clear it would be to reset the MIFM card as there is no way to programmatically clear the CID. ------------------ NEC Unified Solutions / Voice Mail and Unified Messaging | Active Voice, LLC
|
|
|
Forums84
Topics94,296
Posts638,846
Members49,769
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
169
guests, and
298
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|