sundance-communications.com/forum Forums TDM Business Telephone Systems NEC Telephones & Systems NEC 2000 IPS

Anyone have NEC 2000 IPS manual

I do...but not able to part with it. Anything I can help with?

Try here.
https://www.wedophones.com/NecManualsLead.htm

Thanks for the link....they just about every manual except for the NEC 2000

I have someone that wants me to some work on one. What interface is used for programming? What would the default login be?

You can use the MatWorx software as a user interface to do the programming via Funtions -> MOC.

Or you can do the programming via a digital phone (CAT):
To Access CAT mode do the following within 4 seconds:
Press Transfer, CONF, *, Transfer, CONF, #
CAT Mode will now be displayed on the LCD.
Press the ST key to access the command prompt.

The assigned keys vary by the model of phone, but as an example I have a Dterm seriesI 8D and the keys are as follows:

Recall = DE
CONF = EXE
Redial = ST
Answer = CE
Speaker = S
Transfer = ,
Hold = <-

Hope this helps!

For just about everything you want to do you can use the IVS manual that can be found on that web site. Little changed from that model to the IPS

Just a note that if you want this for such things as IP programming info make sure you get Issue 4 as the earlier versions don't have IP info in them.