|
|
|
|
Joined: Oct 2006
Posts: 28
Member
|
|
Member
Joined: Oct 2006
Posts: 28 |
We have installed the Ultra CallAnalyst lite on a DS2000. Problems with the reporting is when you ask for an incoining report it will give a detail of incoming call then the next line will have XXXX in the calling number but the detail information is the same as the original incoming call. This is giving double calls count incoming. We have removed it and re installed the program but this did not help. What's happening?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jun 2006
Posts: 123
Member
|
|
Member
Joined: Jun 2006
Posts: 123 |
What kind of info do you get from using hyperterminal or procom.You can see what the raw smdr is , That way you will know what the system is sending,could be a problem with the CallAnalyst. Jayman
|
|
|
|
|
Joined: Oct 2006
Posts: 28
Member
|
|
Member
Joined: Oct 2006
Posts: 28 |
Went into smdr through Hyperterm and all appears to be working correctly. Are there some special settings required for the CallAnalyst that are not documented?
|
|
|
|
|
Joined: Jun 2006
Posts: 123
Member
|
|
Member
Joined: Jun 2006
Posts: 123 |
I would guess it would depend on the software or baud rate on the callanalyst.You may have to match their settings.Can you make changes on the callanalyst? Thanks Jayman
|
|
|
|
|
Joined: Jun 2006
Posts: 123
Member
|
|
Member
Joined: Jun 2006
Posts: 123 |
Oh yea! I can't find any settings on the NEC side that would cause a problem unless its a hardware problem!!
|
|
|
|
Forums84
Topics94,518
Posts639,984
Members49,850
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
446
guests, and
36
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
