|
|
|
|
Joined: Feb 2007
Posts: 58
Member
|
|
Member
Joined: Feb 2007
Posts: 58 |
Hi guys.. I would just like to ask if the LED indications in the manual is correct. It says that LED1 should be color green. Is this correct for your PRT cards? Because right now my LED1 is blinking red. One more thing when we loop back the Tx and Rx of the amphenol for the PRT card should the alarms go off? Thanks hope i could contribute in the future.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Feb 2007
Posts: 11
Member
|
|
Member
Joined: Feb 2007
Posts: 11 |
What version of prt card? All the ones I've seen are red.
"Layer 1 Status
LED Lights red when layer 1 is active. The LED is off when
layer 1 is inactive."
Also, looping back at the amphenol will not get the alarm to go out because you do not simulate the d channel with loop. T-1 yes pri no.
|
|
|
|
|
Joined: Feb 2007
Posts: 58
Member
|
|
Member
Joined: Feb 2007
Posts: 58 |
i have been reading the manuals and it says out of the 32 channels for the PRT card.. 2 channels are alocated for D-chanels so i think loop back does work. Well are there any 2nd motions on this 1?
|
|
|
|
|
Joined: Feb 2007
Posts: 58
Member
|
|
Member
Joined: Feb 2007
Posts: 58 |
oh by the way i'm programming an IPK 192 ports.
|
|
|
|
|
Joined: Feb 2007
Posts: 58
Member
|
|
Member
Joined: Feb 2007
Posts: 58 |
I have my hands on a working PRT-U13 ETU already.. tested it and loop back tests on the amphenol work.. Scheduled to install this upcoming monday.. wish me luck thanks..
|
|
|
|
Forums84
Topics94,522
Posts639,999
Members49,851
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (justbill),
259
guests, and
43
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
