sundance-communications.com/forum Forums TDM Business Telephone Systems NEC Telephones & Systems Help programming an Electra Elite IPK system

I see 1 huge mess slowly building and you and/or the system are going to lose your job(s) for non-performance. I'd get a visit from a qualified tech, if I were you. If 'Arlington' is in VA, there are probably 3 or 10 dealers in your area that can set your system up just as you want it, show you some kinks and twists, and possibly even offer a remote programming service for a whole lot less than you might think! Just a thought. John C.

actuali defaulting system in ipk asyns everything automaticali includin incoming.. line keys fr MLT's and incoming access on TEL 01 and TEL 02.. which is the difference in IPS 2000 just clearing that up..

Second what LightningHorse said.

A complete system redesign on an Elite is not a job for an Elite novice. The Elite will do everything you're trying to do, plus much much more, but you need to have a plan from the get-go or else you'll tie yourself in knots. As a man who has had to B & C a NEAX after being given the wrong specs for CM 05, believe me when I say that, without a plan from the beginning, you will rue the day you touched this Elite.

You could try to follow each piece of advice in turn, but the net result would be a mess. Get a pro, and do it right. The customer will be much happier, and you'll have fewer screaming phone calls.

To all

thanks for all your help and advice. So far i have get the stations and voicemail to work. These are (hopefully) my last two questions:


Caller ID: What do i need to do in order to make it work?

how can i get to know from port 00 or 01 if i have the correct hardware to make it work?

you need a "COID" card instead of a "COI" card to make that work.. Also ask for you service provider to have caller ID turned(well this is how it is in our country not sure in other countries)