web statisticsweb stats

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Joined: Mar 2005
Posts: 7
Member
Member
Offline
Joined: Mar 2005
Posts: 7
Working currently on an NEC IPK w/ paging. Customer has Valcom Self-Amp paging horns (10-15 of them) and have a V2003A Multi-Zone amp. The Amp is connected through a CO Port.

There are three zones total. One zone has music, the other two have no music.

A majority of the phones are DTH-8D-1, 8-button phones. They are using all 8 lines and want to keep the lines squared not pooled.

Hooked up the Paging amp to line 9 in the system. The Operator can page by pressing line 9 and the zone. However none of the other 8-button phones can page (Since they don't have access to line 9).

QUESTIONS:
Can the 8-button phones access line nine with a feature or access code?

Does anyone have any ideas regarding the Valcom V2003A. Can it be programmed to work w/ an extension port. The extension would be dialed and then the zone?

Any would would be MUCH appreciated!


Telephone Surplus
360-695-7644
Vancouver, WA
Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Joined: Mar 2008
Posts: 1
dgi Offline
Member
Member
Offline
Joined: Mar 2008
Posts: 1
Yes, you can access a trunk by dialing #9 and 3 digit trunk number, in your case it would be:
#9009.

You can also purchase a PGD(2) Adapter that connects to a ESI Port. Then you would use the ext page access codes. Each PGD can support two zones. System programming also allows you to turn on and off BGM through ext zones.

Joined: Jul 2006
Posts: 731
Member
Member
Offline
Joined: Jul 2006
Posts: 731
Another idea would be to give all the phones identical cap keys to simulate a squared system & assign line 9 to button 8.


www.phonelinetech.com


"Can I Still Call Out?"
Joined: Jan 2008
Posts: 17
Member
Member
Offline
Joined: Jan 2008
Posts: 17
Fastest way is to program CO9 on button 9 in memory block 4-12. It will still work even if you have all 8 button phones. Put CO9 in say trunk group 06 and make an access code like 8 equal a 106 in memory block 1-1-46/47.

End users can dial 8 then hear valcom tone and dial the zone number. They will not see a light lit on the phones but it will still work.

PGD's are only used on the IPKII, they will not work on an IPK.


Moderated by  ttech 

Link Copied to Clipboard
Newest Topics
3515 vodavi phones.
by Gary S. - 05/01/25 12:26 PM
AT&T Coinsoft
by ChrisRR - 04/30/25 02:39 PM
Inter-tel Encore CX aka Mitel 3000 circa 2008
by Telesystems - 04/27/25 02:20 PM
Just a little of what I've been working on
by John807 - 04/25/25 11:42 AM
Forum Statistics
Forums84
Topics94,524
Posts640,007
Members49,851
Most Online5,661
May 23rd, 2018
Newest Members
DEN2MM, ferhat_efe, utec, MoverDub, Kevin usama
49,851 Registered Users
Top Posters(30 Days)
Toner 6
dexman 4
Taddeo 4
Who's Online Now
0 members (), 194 guests, and 36 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998 - 2025
Powered by UBB.threads™ PHP Forum Software 8.0.0