|
|
Joined: Oct 2006
Posts: 28
Member
|
|
Member
Joined: Oct 2006
Posts: 28 |
Installed a DSX 40 only to have the caller id not work on line 1 and 3. While line 2 works perfect. Moved line 1 to line 2 works perfect moved line 1 back to position 1 CID does not work. Same with line 3! Any thoughts on what can be done?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jan 2004
Posts: 6,648
RIP Moderator-Nisuko-Tie, General
|
|
RIP Moderator-Nisuko-Tie, General
Joined: Jan 2004
Posts: 6,648 |
did you look at the programing of line 2 vs 1 and 3 ?
Skip
------------------------------------
Serving SW and West central Fl since 1984
|
|
|
|
|
Joined: Oct 2006
Posts: 28
Member
|
|
Member
Joined: Oct 2006
Posts: 28 |
Verified all programming, tested cid on all lines.
|
|
|
|
|
Joined: Mar 2006
Posts: 1,596
Member
|
|
Member
Joined: Mar 2006
Posts: 1,596 |
What about your line polarity (I have found that that can sometimes make a difference...)
|
|
|
|
|
Joined: Apr 2004
Posts: 4,991
Member
|
|
Member
Joined: Apr 2004
Posts: 4,991 |
Did you go into line config 3121 and check all three lines and reconfirm all three are on and up loaded.?
|
|
|
|
|
Joined: Jan 2004
Posts: 6,648
RIP Moderator-Nisuko-Tie, General
|
|
RIP Moderator-Nisuko-Tie, General
Joined: Jan 2004
Posts: 6,648 |
have you tried going to line config and using 2 as source and copying to one and three ?
Skip
------------------------------------
Serving SW and West central Fl since 1984
|
|
|
|
|
Joined: Nov 2007
Posts: 369
Member
|
|
Member
Joined: Nov 2007
Posts: 369 |
If you moved line 2 to trunk 1 and received Caller ID, then there is no programming issue with the DSX40. I always carry with me an inexpensive caller ID box that I can place across a line to test for caller ID data. My guess is perhaps the telco is not sending the Caller ID info on lines 1 & 3.
"I didn't do it, and I won't do it again"
|
|
|
|
|
Joined: Jan 2004
Posts: 6,648
RIP Moderator-Nisuko-Tie, General
|
|
RIP Moderator-Nisuko-Tie, General
Joined: Jan 2004
Posts: 6,648 |
If you moved line 2 to trunk 1 and received Caller ID, then there is no programming issue with the DSX40. thats not the way I read it Installed a DSX 40 only to have the caller id not work on line 1 and 3. While line 2 works perfect. Moved line 1 to line 2 works perfect moved line 1 back to position 1 CID does not work. Same with line 3! Any thoughts on what can be done? sounds like he gets CID from all three lines but only if terminated to trunk two position so he has verified CID from the carrier CID is programed on a per trunk basis
Skip
------------------------------------
Serving SW and West central Fl since 1984
|
|
|
|
|
Joined: Jun 2006
Posts: 1,624
Member
|
|
Member
Joined: Jun 2006
Posts: 1,624 |
Sounds like Skip is right on to me too. He's missing a piece in the programming of lines 1 and 3.
"I'm the one that has to die when it's time for me to die, so let me live my life, the way I want to."
-- Jimi Hendrix
|
|
|
|
|
Joined: Apr 2004
Posts: 4,991
Member
|
|
Member
Joined: Apr 2004
Posts: 4,991 |
I,m reading this the same as Skip and Stacy.
On your line config page program 3121
for line 1- 101 it should be yes
2- 102 it shoud be yes
3- 103 it should be yes
or copy as Skip suggested and up load.
Good luck
If you plug line one into 2 and cid works and line 3 into 2 and cid works ,programming would be the issue.
|
|
|
|
Forums84
Topics94,518
Posts639,984
Members49,850
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
221
guests, and
41
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
