sundance-communications.com/forum Forums TDM Business Telephone Systems NEC Telephones & Systems Ring to VM

Hi all,
I haven't been posting in a while but i will be getting back on it now. A while back i posted some articles about the infoset systems. I would like to thank everyone that replied and helped me out.

I would like to set up my infoset system to:

During the day-

When calls come in on any line for them to ring all phones then after 4 rings go to the auto attendant.

Night-
Go strait to aa. (I have already got this right)

I have the manuals but i am having a hard time understanding them.

Would this be like delayed ring?

thanks

Yes delayed ring.

If I recall (it's been a long while since I worked on the INFOset).... the line ringing is set in program P301 - P30x where 301 programs the ringing for line 1, P302 programs ringing for line 2, etc.

The data is displayed something like:
55000000
where, counting left to right, are station ports 8,7,6,5,4,3,2,1.... and the 5 represents no ringing, 0 = immediate ring, and any digit 1 -4 is the number of seconds before ringing starts.

For your voice mail port.... one of the eight above (left to right) you would set for 4 secs.
this would give the delay to vm.

There may be another setting that's involved, I'll have to dig out by book (haven't seen that little bugger in quite some time).

Ok i got it working thanks for all your help. if you had not said P301 i would have never got it.

-Austin