|
|
|
|
Joined: Jun 2005
Posts: 13
Member
|
|
Member
Joined: Jun 2005
Posts: 13 |
I have a problem with two PRIs intermitting dropping calls on an IPK II.
The PRIs are interface via a cisco router. Cisco tec seen to think the drop calls maybe due to a timer setting on the IPK. I need to know which corresponding timer on the IPK would be the same as the T203 timer on a Cisco router so I can set then both at 30 seconds
Q.931 specifications timer t203
T203 is the maximum time that equipment can wait between the exchange of Q.921 frames
Thanks for any help
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jul 2006
Posts: 731
Member
|
|
Member
Joined: Jul 2006
Posts: 731 |
What version is on the CPU II? It should be at 1.61 or 2.11 if it it licensed for 2.0. Also make sure the DTI-U40 cards are at firmware 5.11.
Verify the switch protocal with the telco as well. If it does'nt match up, the PRI's will work until the errors fill up causing a reset.
|
|
|
|
|
Joined: Apr 2007
Posts: 1,439
Member
|
|
Member
Joined: Apr 2007
Posts: 1,439 |
DTI U40 firmware version 5.12 now on the NEC FTP site.
D
|
|
|
|
Forums84
Topics94,518
Posts639,976
Members49,850
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
293
guests, and
32
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
