web statisticsweb stats

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Joined: Nov 2011
Posts: 1
Member
Member
Offline
Joined: Nov 2011
Posts: 1
I'm having an issue trying to get some NEC IP phones (Dterm IPK silver phones) to work with our NEC IPK II system from remote sites.

If the phones are connected to our corporate network directly, they work fine.

However, we have problems when we try getting them to work at a remote site which connects to our corporate network through a VPN tunnel. Just keeps trying to search for the MGC.

We have tried setting up the IP phones to either get their address via DHCP or setup static IP settings. We can ping the NEC IPK II from the remote site and even login to the WebPro interface from the remote site as well. However, I cannot ping or get into the web interface of the PVA card from the remote site. I suspect this is the problem, but am having a hard time finding the IP settings for the PVA card.

Our VPN tunnel is an IPSEC tunnel between a Sonicwall NSA 2400 (corporate side) and a Netgear ProSave VPN Firewall (FVS318) at the remote side. The tunnel uses 3DES for encryption, SHA1 for authentication, and Group 2 (1024bit) key exchanges. The tunnel is up as far as the computers are concerned...we can login to the corporate Windows server and ping to our hearts content.

Any suggestions would be welcome!

Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Joined: Dec 2008
Posts: 189
Member
Member
Joined: Dec 2008
Posts: 189
I believe you are going to need NAPT to get the "remote" phones to work. However, keep in mind that NAT (NAPT) isn't NAT for this switch.

Joined: Apr 2008
Posts: 228
Member
Member
Joined: Apr 2008
Posts: 228
You should be able to ping the PVA card as well. This is the MGC address. Check the settings in 84-05

Joined: Jul 2005
Posts: 1,336
Member
*****
Member
*****
Joined: Jul 2005
Posts: 1,336
I assume these are "Mergaco" IP fones for the IPK2 not ones for the 2000 IPS?? I've seen this sort of things happen here..


Regards,

Paul W
Now back to a 0 day week. Love these 7 day weekends.

Moderated by  ttech 

Link Copied to Clipboard
Newest Topics
NEC IP Phones
by juno - 04/04/25 09:05 AM
NEC IP phones rebooting
by jpet621 - 04/03/25 03:03 PM
SV9100 store hours mailbox
by muddybl - 04/03/25 02:10 PM
Samsung Os 7400 Pri Caller Id No Info
by John807 - 04/02/25 06:19 PM
Forum Statistics
Forums84
Topics94,512
Posts639,934
Members49,844
Most Online5,661
May 23rd, 2018
Newest Members
yeloshak, ty3995, Sippy, sersmith, Taddeo
49,844 Registered Users
Top Posters(30 Days)
Toner 8
Taddeo 5
dexman 3
C5Z 2
Who's Online Now
2 members (justbill, Tip&Ring), 153 guests, and 26 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998 - 2025
Powered by UBB.threads™ PHP Forum Software 8.0.0