|
|
|
|
Joined: Oct 2001
Posts: 12
Member
|
|
Member
Joined: Oct 2001
Posts: 12 |
We have a comdial DXP Key voice system V8.1. I have set up for a holiday greeting as per the manual and had our tech rep check out the setup. He says it is OK. I created a holiday routing box that the reception is the owner (as with other boxes). I then put in the holiday dates and specified that routing box. Except that it doesn't work. The holiday box greeting is bypassed for a system greeting that says "Please hold while I transfer you to that extension" and then nothing happens. This is before anyone presses anything. Any ideas. dtmf at Comdial forum said you might have some ideas. TIA.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jul 2001
Posts: 126
Member
|
|
Member
Joined: Jul 2001
Posts: 126 |
Run a trace to a trace log file. Examine the file to see what is happening to the call. This should help. You may have to add entries into the Trans.txt file. Good Luck.
|
|
|
|
|
Joined: Oct 2001
Posts: 12
Member
|
|
Member
Joined: Oct 2001
Posts: 12 |
I finally got it. What I did was create a Holiday Main Routing box without a greeting (in this case 807) and in the Digit 1 I put the box number of the previous Holiday Routing box that has a greeting (806). It worked like a charm. 807 picks up the call and transfers it immediately to 806 where the greeting is played. Thanks for your help. I work in a MIS dept with a NetWare 3.12 network supporting Windows 95 and 98. If I can ever be of assistance, please do not hesitate to e-mail me. Thanks again.
Sue Van
|
|
|
|
Forums84
Topics94,528
Posts640,023
Members49,852
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (nortelvoip),
159
guests, and
43
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
