|
|
|
|
Joined: Apr 2006
Posts: 7
Member
|
|
Member
Joined: Apr 2006
Posts: 7 |
I have a Flash that has been in service on a DK40 for quite awhile. All of a sudden the cust calls and states flash is not processing calls. I went out and flash shows port one led solid- cannot communicate with serial port 2 to do local admin, and system is locked up. Long story short, I've found out that when it shuts down at 0130 to do maintenance, it locks up, craps out and never restarts correctly. I've disabled the maintenance schedule in system config to get around. Any ideas?? Is my working system file corupt?? What kind of cable do I use to monitor my boot up in hyper-terminal- null or straight? Also does stratagy flash create a stratagy.log file like stratagy 6? And if it does how do I get to it to delete? I've used trace log and it shows no errors on this. It is frustrating. I've done the scandisk and reboot. I know the pc based versions of voicemail like the back of my hand. But I can't figure out how to get to the DOS prompt to dig deeper into this- if there is one. Any ideas on this???
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Sep 2004
Posts: 1,436
Member
|
|
Member
Joined: Sep 2004
Posts: 1,436 |
Use the same cable as for programming, but with Hyperterminal set to 115200 baud. When the VM restarts you'll see the boot sequence and have the option to go to DOS or start the VM. Once you're in DOS, it's basically the same as a 6.
Joe
---
No trees were harmed as a result of this posting; however, many electrons were severely inconvenienced.
|
|
|
|
Forums84
Topics94,531
Posts640,040
Members49,852
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (nortelvoip),
138
guests, and
47
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
