|
|
|
|
Joined: Sep 2009
Posts: 8
Member
|
|
Member
Joined: Sep 2009
Posts: 8 |
Howdy folks!
Got another question. When a trouble is refered to as a AIS-CI issue.. What does that include? wiring? equipment? or is it just a general alarm?.. Got a customer with that type of trouble and his asking what does it refer to?
The following CI Alarm are detected at DHEC245007 ATI
A. AIS-CI Detected
Z. AIS-CI Detected
Thanks..
Bob
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: May 2007
Posts: 5,059 Likes: 6
Moderator-1A2, Cabling
|
|
Moderator-1A2, Cabling
Joined: May 2007
Posts: 5,059 Likes: 6 |
Alarm Indication Signal - Customer Installation.
Do a search in this forum and you'll find all the info you need. Here's a clip:
"All T1 NIU's since 1998, and all HDSL units since 1999 support a feature called AIC-CI.
AIS-CI is a variant to the standard AIS alarm pattern. AIS-CI is sent into the network by NIU's & HDSL remote units upon detection of a loss of signal (LOS) from the attached CPE, or if the customer equipment is sending AIS. This tells the LEC technicians that the AIS "like" signal is not a network fault, but a fault that is originating from the CPE side of the DEMARC. ANSI T1.403 & ANSI T1.231 go into considerable detail with AIS & AIS-CI."
Sam
"Where are we going and why are we in this hand basket?"
|
|
|
|
Forums84
Topics94,518
Posts639,984
Members49,850
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
109
guests, and
29
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
