|
|
|
|
Joined: Aug 2008
Posts: 19
Member
|
OP
Member
Joined: Aug 2008
Posts: 19 |
I have a 4 cabinet XTS with 2 PRI cards in Slot 05 and 06 with the all of the necessary connectors between the PRI's. In order to cut back on the telecom expense, the 1st PRI was disconnected and the lines taken out of service but the card was never removed. I am now seeing an extremely high count of SLIP Alarms. My logic is to remove the 1st PRI Card and make the programming changes to completely take it out of the system. I just wanted to get a second opinion.
MWells
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jan 2005
Posts: 15,378 Likes: 13
Moderator-Vertical, Vodavi, 1A2, Outside Wire
|
|
Moderator-Vertical, Vodavi, 1A2, Outside Wire
Joined: Jan 2005
Posts: 15,378 Likes: 13 |
The system was receiving timing (clock) from the first PRI circuit. Without this, the system doesn't stay in sync with the central office. You'll need to enable the clock on the second PRI card, then reboot the system in order to resolve this.
Ed Vaughn, MBSWWYPBX
|
|
|
|
|
Joined: May 2002
Posts: 17,722 Likes: 18
Member
|
|
Member
Joined: May 2002
Posts: 17,722 Likes: 18 |
No need to start another topic. You asked the same question here and got the same answer. Let's keep it all in one topic. If you need clarification just ask in the original topic. Thanks.
Retired phone dude
|
|
|
|
Forums84
Topics94,291
Posts638,815
Members49,767
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (highlysecptial),
136
guests, and
356
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
