EMP & Lightning Home Surge Protection
EMP - Click Here!
Global Test Supply
Linked Banner to your Product or Website
eCommerce website for sale!
Previous Thread
Next Thread
Print Thread
Rate Thread
#27416 04/21/01 08:26 PM
Joined: Apr 2001
Posts: 2
tony Offline OP
Member
OP Offline
Member
Joined: Apr 2001
Posts: 2
I read the procedure for activating a new CO line on the 1024...would this be the same for an 308 (which is what i am looking to add the new CO)

Global Test Supply 728x90
#27417 04/21/01 10:39 PM
Joined: Mar 2001
Posts: 7,350
RIP Admin
*****
Offline
RIP Admin
*****
Joined: Mar 2001
Posts: 7,350
tony
No the 308 has different programming.To activate a line on the 308 you have to do the following.
In "Line Class Of Service" make sure the line isn't disabled.
With handset down at station 10
Intercom *746*
Press the line you want to add
Dial 2
Dial *
Press (Monitor or Speaker)to end

For Station Class Of Service
Intercom *746*
Dial station number (10-17)
Dial 7
Press line (Key1-3)
Dial (1-3)
Dial *
Press (Monitor or Speaker)to end
Hope this helps
dtmf


Russ runs a local service and private tech center.

[Linked Image from sundance-communications.com]
Telrad Digital Programmer networked and standard kits available.
Commercial and Residential All Types Phone Service
#27418 04/24/01 06:23 PM
Joined: Apr 2001
Posts: 2
tony Offline OP
Member
OP Offline
Member
Joined: Apr 2001
Posts: 2
I attempted the procedure you described without success. At station 10, when i pressed intercom and dialed *746*, the system returned fast busy. This is a Comdial Executech 308 system where all sets have line 3 setup as speed call key. What did I miss? Thanks for the reply.

#27419 04/24/01 06:34 PM
Joined: Mar 2001
Posts: 577
Member
Offline
Member
Joined: Mar 2001
Posts: 577
Try ITCM*#746*


In Memory of Moderator Bruce Owen who pass away Jan 20 2004.
http://www.owentel.com
#27420 04/24/01 08:00 PM
Joined: Mar 2001
Posts: 7,350
RIP Admin
*****
Offline
RIP Admin
*****
Joined: Mar 2001
Posts: 7,350
tony
How old is this system? There should be a white tag on the right side of the KSU that will tell you exactly what you have. If ITCM *746*gets you in.Then the steps in my other post will set up line three on your system.If ITCM*#746* gets you in then you have a (NO system) which programs like a 1024. Make sure you are programming at station 10 with the handset in the craddle.Let me know what happens.
If you would like I can fax you the program charts for either system.
dtmf

[This message has been edited by dtmf (edited 04-24-2001).]


Russ runs a local service and private tech center.

[Linked Image from sundance-communications.com]
Telrad Digital Programmer networked and standard kits available.
Commercial and Residential All Types Phone Service
#27421 04/24/01 08:27 PM
Joined: Jun 2001
Posts: 10,631
RIP Admin-Founder
*****
Offline
RIP Admin-Founder
*****
Joined: Jun 2001
Posts: 10,631
tony
you didn't miss anything. dtmf gave you the programming for the older 308 (tan) front, I think yours has a black front case on it, which is an "NO 308" which will program like openwire said ITCM*#746* and follow the 1024 manual you have. A fast busy means an error, make sure the handsets in it's cradle and your at station 10. (to find station 10 go to a phone and dial 0, where it goes, is station 10) try to use a phone that's in a back room somewhere because if ya try the test above from station 10 you'll be trying to call yourself. Hope that wasn't confusing. [Linked Image from sundance-communications.com]


Link Copied to Clipboard
Advertising Sponsor
Popular Topics (Views)
Forum Statistics
Forums94
Topics93,278
Posts634,061
Members49,493
Most Online5,661
May 23rd, 2018
Today's Birthdays
Laura Figueroa, mark dagg
Newest Members
Dave McCann, Mitel Hotel, Jonathan Renaud, dentnshell, Adam Suth
49,492 Registered Users
Get Tech Support Now! Click the banner below
Get Tech Support Now!
Top Posters (30 Days)
dexman 6
MnDave 3
Advertising Sponsor Spot 2
EMP Shield for Commercial - Home & Vehicle
Use Coupon code SAVE - Click Here!
Who's Online Now
18 members (Schreiber, tn00247167, Butch Cassidy, dexman, RATHER BE FISHING, metelcom, newtecky, pvj, JBean3329, Yoda, nortelvoip, hitechcomm, justbill, KRRath, mongo5150, Steve M, Ruben, Touch Tone Tommy), 281 guests, and 55 robots.
Key: Admin, Global Mod, Mod
Contact Us | Telephone System Tech Support | Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
©Copyright Sundance Communications 1998-2021
Trusted Partners
landing page builder Antiransomware 300x250 Your Business Phone Service in the Cloud