web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 2 1 2
#27658 01/17/02 11:27 AM
Joined: Jan 2002
Posts: 33
cnbrown Offline OP
Member
OP Offline
Member
Joined: Jan 2002
Posts: 33
Found a wierd quirk that I havn't been able to work around yet. I have a DXP with two PRI cards. CFOS is enabled on a station. A DID is set to ring to the station.

The user, when he goes home, sets CFOS to active for all calls. Intercom calls and calls ringing into his DID will ring through to the programmed CFOS number (his cell phone).

If someone dials our main number and the auto-attendant answers, the person enters his intercom number after a few seconds they receive a message "Call cannot be completed as dialed." The station, and CFOS setting, is set to prime to the main line group. Looks like all of the remote numbers are not getting sent through or something.

I think it is strange that it works with a regular intercom call, a DID call, just not from the auto-attendant.

We're running DXP Software revision 13A if that makes any difference.

Any ideas?


[This message has been edited by cnbrown (edited January 17, 2002).]


Chris Brown
Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

#27659 01/30/02 08:01 PM
Joined: Jul 2001
Posts: 23
Member
Offline
Member
Joined: Jul 2001
Posts: 23
Use ARS and ARS dialing pause. Program the CFOS number into the ARS table and put a pause in front of it.

#27660 01/31/02 04:40 AM
Joined: Jan 2002
Posts: 33
cnbrown Offline OP
Member
OP Offline
Member
Joined: Jan 2002
Posts: 33
I hate to be a moron, but I know absolutely nothing about the ARS section of programming. Can you shed any light on programming the number in the table with the pause.

I've always been much better with Station programming, station hunting, voice mail integration, and System options.

Thanks,
Chris


Chris Brown
#27661 02/01/02 10:53 AM
Joined: Nov 2001
Posts: 34
Member
Offline
Member
Joined: Nov 2001
Posts: 34
There are some issues with CFOS and early software with PRI. The lates software 17a 191.1 address's most issue's.
If you up grade the DXP software, also up grade the PRI software.
Is the user's mail box setup to do a blind transfer.
Does a transfer from a station user have the some resault as the VM.

#27662 02/01/02 10:56 AM
Joined: Jan 2002
Posts: 33
cnbrown Offline OP
Member
OP Offline
Member
Joined: Jan 2002
Posts: 33
Yep, any transfer has the same problem.

The only time CFOS seems to work right is it the call is a straight INTERCOM call or a DID direct call.

The mailbox is setup for blind transfer.

Any idea how I would go about getting a software upgrade and PRI software upgrade. I had a rep tell me the upgrades are like $1,000 or something. That's a lot of money for a bug fix upgrade. Any ideas?
Thanks,
Chris

[This message has been edited by cnbrown (edited February 01, 2002).]


Chris Brown
#27663 02/01/02 12:42 PM
Joined: Jul 2001
Posts: 126
Member
Offline
Member
Joined: Jul 2001
Posts: 126
Before you get the upgrade. Have you tried selecting a line for the CFOS to use and then put a phone on the line to listen to the progress. Even better would be a digit grabber on the line to see what out pulses. Just a thougt before you buy.

#27664 02/01/02 12:43 PM
Joined: Jan 2002
Posts: 33
cnbrown Offline OP
Member
OP Offline
Member
Joined: Jan 2002
Posts: 33
We are using PRI circuits, so there is no line to actually activate and listen to.


Chris Brown
#27665 02/01/02 01:24 PM
Joined: Jul 2001
Posts: 126
Member
Offline
Member
Joined: Jul 2001
Posts: 126
Since there is no POTS line and all you have is PRI's. Call the service provider, have them monitor the PRI when you place a test call and hopefully he can monitor the correct channel. I do not recall if you can busy out certain channels on the system. This would make the monitoring easier for the provider.

#27666 02/06/02 08:54 PM
Joined: Jul 2001
Posts: 23
Member
Offline
Member
Joined: Jul 2001
Posts: 23
Enable TOLL/ARS diailng pause in SYSTEM PROGRAMMING. Program the number(s) you wish to cfos to in the restriction table(s) and insert a pause (p) in front of the number(s). Enable ARS in system programming. Whenever the number is dialed the system will wait the programmed length of the pause time before sending the digits. This has worked for me in the past.

#27667 02/06/02 09:01 PM
Joined: Jul 2001
Posts: 23
Member
Offline
Member
Joined: Jul 2001
Posts: 23
email me if you are still having trouble.

Page 1 of 2 1 2

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,693
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,097 Shoretel
187,703 CTX100 install
186,792 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 14
TDKs79 8
pvj 4
Who's Online Now
0 members (), 89 guests, and 251 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5