|
|
Joined: Jun 2004
Posts: 6
Member
|
OP
Member
Joined: Jun 2004
Posts: 6 |
It seems our ivpc 2 port board is dead. Does anyone know where we can purchase a new or refurbed one? Thanks!
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Mar 2001
Posts: 7,350
RIP Admin
|
|
RIP Admin
Joined: Mar 2001
Posts: 7,350 |
Russ runs a local service and private tech center. ![[Linked Image from sundance-communications.com]](https://www.sundance-communications.com/installers/logos/65graphic.jpg) [/url]
|
|
|
|
|
Joined: Apr 2004
Posts: 731
Member
|
|
Member
Joined: Apr 2004
Posts: 731 |
Thats unusual. I have not seen those cards go bad.
If you are sure its the card.
|
|
|
|
|
Joined: Jun 2004
Posts: 6
Member
|
|
OP
Member
Joined: Jun 2004
Posts: 6 |
I thought it was strange too, since the system is less than 2 years old. The company that installed it didn't even come to the office, we just explained the symptoms and they said we needed a new ivpc board at $400.00 plus $135 to install.
|
|
|
|
|
Joined: Apr 2004
Posts: 731
Member
|
|
Member
Joined: Apr 2004
Posts: 731 |
|
|
|
|
|
Joined: Jun 2004
Posts: 6
Member
|
|
OP
Member
Joined: Jun 2004
Posts: 6 |
The voicemail just stopped working. We re-booted and after selecting "Voice-mail" set-up, it goes to demo mode. The phone company that installed said we should see the "ports" listed, which we do not.
|
|
|
|
|
Joined: Oct 2001
Posts: 6,160
Member
|
|
Member
Joined: Oct 2001
Posts: 6,160 |
Make sure your key is still plugged in the back of the PC. It looks like a rs232 type connector with no cable coming out of it.
mark
|
|
|
|
|
Joined: Jun 2004
Posts: 6
Member
|
|
OP
Member
Joined: Jun 2004
Posts: 6 |
O.K. Checked all the connections and everything looks good. When we booted up, the screen reads "driver not found", then it gives the set-up choice of "Voicemail" "dos" etc. and starts demo mode. Any help is greatly appreciated!
|
|
|
|
|
Joined: Oct 2001
Posts: 6,160
Member
|
|
Member
Joined: Oct 2001
Posts: 6,160 |
It is the "key" that allows the voicemail software to be fully operational. If the key is not in place the system will only boot to demo. If the key is properly in place and it still will only boot to demo, it very well may be the IVPC board. And your vendors price does not seem to be out of line.
mark
[This message has been edited by markk (edited June 22, 2004).]
|
|
|
|
|
Joined: Apr 2004
Posts: 731
Member
|
|
Member
Joined: Apr 2004
Posts: 731 |
yes Markk is correct.
If it comes up into demo mode check the dongle (software key) on the unit. usually black unit plugged into the printer port of the voicemail. make sure it is plugged in.
|
|
|
|
Forums84
Topics94,299
Posts638,872
Members49,770
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
131
guests, and
305
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
![[Linked Image from home.columbus.rr.com]](http://home.columbus.rr.com/toddmiriam/animations/bulldog1.gif)
