|
|
|
|
Joined: Aug 2003
Posts: 67
Member
|
|
Member
Joined: Aug 2003
Posts: 67 |
can somebody send me a PM telling me which dip switch setting I need to use to set the system to master clear in mode 3. The laptop is down and the phones are flashing no communication.
thanks
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Aug 2004
Posts: 9,172 Likes: 22
Admin
|
|
Admin
Joined: Aug 2004
Posts: 9,172 Likes: 22 |
Wasn't aware there was a dip for that. There is one to master clear after software upgrade. :shrug:
|
|
|
|
|
Joined: Mar 2005
Posts: 588
Moderator-Mobil Phones, Computers
|
|
Moderator-Mobil Phones, Computers
Joined: Mar 2005
Posts: 588 |
Dip switch 8 on the services board will do a master clear, but the mode is in system programming. I assume FXII here?
|
|
|
|
|
Joined: Aug 2004
Posts: 9,172 Likes: 22
Admin
|
|
Admin
Joined: Aug 2004
Posts: 9,172 Likes: 22 |
Dip switch 8 only gives a master clear after software upgrade.
|
|
|
|
|
Joined: Jul 2003
Posts: 6,768
Member
|
|
Member
Joined: Jul 2003
Posts: 6,768 |
Nick52 you need to tell us what system you are working with. Master Clear/mode 3 does not need a switch. Depending on the system you may need to set a switch to force a baud rate if you can't get in via phone and do not know the baud rate. The mode is the master clear, the mode number tells what you will get by default. I hope you know that mode 3 is no programming at all.
RBF is right about MC only after software upgrade with switch 8
|
|
|
|
Forums84
Topics94,521
Posts639,995
Members49,851
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (justbill),
177
guests, and
47
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
![[Linked Image]](https://sundance-communications.com/forum/images/559.jpg)
