|
|
|
|
Joined: Jun 2006
Posts: 17
Member
|
|
Member
Joined: Jun 2006
Posts: 17 |
I have a DSU II system with 5 out side lines connected. Normally, when I pick up the phone, system will auto assign an available line to make a call. However, Something happened. The line2 is always not picked and I try to menu push line 2 button to select the line. I hear nothing. No dial tone. I use a cell phone to call line2 phone number and it does not pick up by system. It just ring forever.
Please help me.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Mar 2001
Posts: 3,268
Member
|
|
Member
Joined: Mar 2001
Posts: 3,268 |
No dial tone.
1. That possibly means you have no live line going into your DSUII. Have you had some storms lately?? Perhaps the lightning protection has been been hit. Check D-Mark. If there is DT there, replace lightning protection.
2. Bad line port two. Possibly hit by lightning.
3. Your local carrier has problems with that line. It may be their problem. If that's the case--you need to notify them.
If you are not familiar with troubleshooting--you may want to call in a Comdial tech. The price of a service call will be well worth it.
|
|
|
|
|
Joined: May 2008
Posts: 34
Member
|
|
Member
Joined: May 2008
Posts: 34 |
If you folks do have dial tone at the Dmarc,you should have an extra available port on the system that you can have a tech reassign to the extensions for the users to select.You can even reassign the extra port to the same buttons on all extensions and rename the extra line (line 2)
CCEJIM
|
|
|
|
Forums84
Topics94,513
Posts639,937
Members49,844
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
219
guests, and
43
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
