|
Joined: Feb 2006
Posts: 37
Member
|
OP
Member
Joined: Feb 2006
Posts: 37 |
Have spoken with Vertical/Comdial Tech Support... they are perplexed... I can setup any CO line to go to any UCD and this happens (tried the built-in 410-414 for this, and others, such as 416 - we will use this one for testing since 410-414 have "some kindof other strange programming features???") ... switch and vmail in day mode. Call goes to proper UCD (416)for testing (all ring, no answer timer 5, overflow 1 timer 5, overflow 1 dest 433, overflow 2 timer 5, overflow 2 dest 433, overflow count 1, re-route dest 433. Trans.txt is set to send UCD ID a9byd07=3101, a9byd31=3201, a9byd55=3301 (have also tried a vmail box, such as 111*,*
... call comes in, UCD sends call to vmail, trace shows proper ID, call is routed to 3101, then back to 416 on switch, then back to 3201 on vmail , then back to 416 on switch >> sounds good so far huh? << but ahhhhh... when it gets to the re-route, IT ALWAYS GOES TO BOX 800 IN VMAIL, !!WITH NO TRACE INFO DISPLAYED!!
help????!!!!!
Patrick
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Oct 2001
Posts: 6,160
Member
|
Member
Joined: Oct 2001
Posts: 6,160 |
Patrick, I gave you installer forum permission and I'm moving this to that forum and locking it here.
I've done a couple of these but I need to look at my saved prog. database to remember what to do, and it's on a site right now.
Mark
|
|
|
Forums84
Topics94,290
Posts638,801
Members49,767
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
77
guests, and
420
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|