sundance-communications.com/forum Forums TDM Business Telephone Systems Samsung Telephones & Systems Samsung DCS816 ISDN Upgrade

Hi there,
we own a DCS816 which we have done some DIY programming on and got it working using normal analogue lines with no probs.

I have recently purchased a 2 port basic rate ISDN card for the system which I have installed and we are waiting for our existing analogue lines to be converted to
ISDN.

I believe that im going to have to make some changes to the system ie. the trunk
usage once these lines are upgraded. The
guy that sold me the system a while back
suggested something like having to delete
the analogue trunks and set the Basic rate
isdn trunks to be used.

Please can anyeone in the know let me know
where this is done ie. which MMC as I have
trailed through them and cannot imagine where to start.

Thanks in advance,

Mike

go to mmc 419 and make your bri mode p-p nor if you are not using ddi.

Richard.

Thanks for helping out here at the forums.
Some things to keep in mind rules

We generaly dont rehash posts this old, as they may not be looking for the answer this late in the game. You are more than welcome to offer help though.