|
|
|
|
Joined: Jul 2004
Posts: 28
Member
|
|
Member
Joined: Jul 2004
Posts: 28 |
Just a guess, but did you check to see if the trunk numbers were in MMC 724?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Sep 2001
Posts: 2,360 Likes: 9
Moderator-Executone-Isoetec, Samsung
|
|
Moderator-Executone-Isoetec, Samsung
Joined: Sep 2001
Posts: 2,360 Likes: 9 |
If the system was defaulted then the numbering plan should be ok.
If it is then you should be able to dial 701,702,703 704 to access the trunks.If it says invalid number then yes the numbering plan needs to be set up.
|
|
|
|
|
Joined: Apr 2005
Posts: 12
Member
|
|
Member
Joined: Apr 2005
Posts: 12 |
yes I did default the system, and No i havnt done anything in 724. I have read the manual just now on 724 but sadly dont fully understand it, any help would be great ![[Linked Image from sundance-communications.com]](https://www.sundance-communications.com/forum/smile.gif)
|
|
|
|
|
Joined: Sep 2001
Posts: 2,360 Likes: 9
Moderator-Executone-Isoetec, Samsung
|
|
Moderator-Executone-Isoetec, Samsung
Joined: Sep 2001
Posts: 2,360 Likes: 9 |
caleb try what I posted above.Can you dial 701,702 etc and not get an Invalid number message?Does it say out of service?
|
|
|
|
|
Joined: Apr 2005
Posts: 12
Member
|
|
Member
Joined: Apr 2005
Posts: 12 |
yes I dial 701....704 and it says "out of service"
Is that bad news ?
|
|
|
|
|
Joined: Sep 2001
Posts: 2,360 Likes: 9
Moderator-Executone-Isoetec, Samsung
|
|
Moderator-Executone-Isoetec, Samsung
Joined: Sep 2001
Posts: 2,360 Likes: 9 |
Then I would say the trunk card is bad.
|
|
|
|
|
Joined: Apr 2005
Posts: 12
Member
|
|
Member
Joined: Apr 2005
Posts: 12 |
|
|
|
|
|
Joined: Dec 2004
Posts: 56
Member
|
|
Member
Joined: Dec 2004
Posts: 56 |
Nobody asked this question, so I guess I will. Can you make a call directly off of the DMarc using a test set? Are you using a channel bank at all. I have seen trouble with the DCSC and ADTRAN channel banks being configured wrong. If you meter the line, is it between 28 and 35 milliamps?
Other than that, sounds like a bad trunk card!
\
|
|
|
|
|
Joined: Apr 2005
Posts: 12
Member
|
|
Member
Joined: Apr 2005
Posts: 12 |
MAN !! the guy i brought the system off told me that there are two trunks onboard, I have since found that NOT to be the case so he is sending me down a trunk card !
Also guys, can the samsung 2100b phone work on digital ports ? i am told they are suposed to however I can not get them to work, If i push buttons the keys make a beep sound, other than that they are dead, no dial tone or nothing ?
|
|
|
|
Forums84
Topics94,513
Posts639,938
Members49,844
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (justbill),
165
guests, and
56
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
