sundance-communications.com/forum Forums TDM Business Telephone Systems Samsung Telephones & Systems DCS compact connection

This is kind of a stupid question I was told the house was already wired for a panasonic system however its my understand that all phone systems basically use the name input 25 pair station cable I think it basically has a thick cable with combines all the station pair wires into a plastic clip which connects to the DLI card.

Only in the DCS compact, it would be 8 pairs for 1 cable. Is the connection the same for the Samsung DCS, DCS compact, iDCS 100, iDCS 500 ?

Is this kind of the industry standard to connect the station blocks to the system?

I have seen another method used on a Nitsuko which was a little different. It basically has many individual connector clips all over the size of the card.

I was just wondering if anyone could tell me which one the Samsung DCS compact uses.

I'm under the impressing that all the Samsung phones use the single 25 pair station cable with large clip on the end (per 8/16 extensions) per system card.

Please let me know if this is correct.

Thanks.

Dcs Compact uses a 25 pair amp cable with a female connector on the end of it for connection onto the motherboard.