|
|
Joined: Dec 2011
Posts: 5
Member
|
OP
Member
Joined: Dec 2011
Posts: 5 |
Hello I'm from Argentina, I am extending a samsung pbx 7400, which currently has a 7200 with an LCP pbx, I want to put another cabinet of 7200 and I following problem arises: the third cabinet does not have any board internal tone but if voltage. Putting the third cabinet as 2 works perfectly.
Appreciate any help because in Argentina there is no support for this type of pbx.
Sorry my poor English.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jun 2006
Posts: 3,004 Likes: 4
Moderator-Samsung
|
|
Moderator-Samsung
Joined: Jun 2006
Posts: 3,004 Likes: 4 |
I've never tried, but i suspect that you can't mix OS7200 and OS7400 expansion cabinets, as there is only 1 "expansion cabinet type" setting in the system.
Your better off converting your existing OS7200 Expansion cabinet to a OS7400 cabinet with a LP40 and changing the system programming accordingly.
The OS7400 expansion cabinet gives you 11 slots, which is greater then 2 x OS7200 cabinets (10 slots)
|
|
|
|
|
Joined: Dec 2011
Posts: 5
Member
|
|
OP
Member
Joined: Dec 2011
Posts: 5 |
According to manual says you can, is currently working with a cabinet of 7400 with an MP40 and LP40, 1 of 7200 with a LCP
|
|
|
|
|
Joined: Jun 2005
Posts: 574
Member
|
|
Member
Joined: Jun 2005
Posts: 574 |
you can use a 7200 cabinet as a slave cabinet
|
|
|
|
|
Joined: Aug 2009
Posts: 75
Member
|
|
Member
Joined: Aug 2009
Posts: 75 |
These are the facts.
OS7400 main chassis will support only 1x OS7200 Expn Chassis (using LCP in the OS7200).
The 3rd Cabinet nees to be an OS7400 Expansion chassis.
You can only have 1x OS7200 Expn chassis in an OS7400 solution.
|
|
|
|
|
Joined: Dec 2011
Posts: 5
Member
|
|
OP
Member
Joined: Dec 2011
Posts: 5 |
Hello, I found reading about the versions to version 4.14 of the 7400 has a problem with the third cabinet. I'm testing next week and notice if it works updating to 4.30
|
|
|
|
|
Joined: Dec 2010
Posts: 30
Member
|
|
Member
Joined: Dec 2010
Posts: 30 |
As per my experience and i have read in the broucher that you can make the combination of 2 OS7400 with one OS7200,second one OS7400 with one OS7200,but One OS7400 with 2 OS7200 cabinets will not work you have to use 2 OS7400 Cabinets.
|
|
|
|
|
Joined: Dec 2011
Posts: 5
Member
|
|
OP
Member
Joined: Dec 2011
Posts: 5 |
Hello upgrade the MP40 with version 4.30 and it works OK. A PBX 7400 with 2 cabinets of 7200 with LCP
|
|
|
|
|
Joined: Jun 2006
Posts: 3,004 Likes: 4
Moderator-Samsung
|
|
Moderator-Samsung
Joined: Jun 2006
Posts: 3,004 Likes: 4 |
It might work, but why would you do this?
You'd get more capacity replacing the OS7200 EXP with OS7400
|
|
|
|
|
Joined: Oct 2010
Posts: 182
Member
|
|
Member
Joined: Oct 2010
Posts: 182 |
Hola Javier! También sos Argentino!
Si funciona perfecto la 7400 con 2 7200 con LCP, pero tiene que ser desde la version 4.30i en adelante.
Yo uso actualmente el software 4.53c para el gabinete 7400.
Te mando un privado para entrar en contacto.
|
|
|
|
Forums84
Topics94,294
Posts638,834
Members49,769
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (justbill),
156
guests, and
337
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
