sundance-communications.com/forum Forums TDM Business Telephone Systems Samsung Telephones & Systems 7200S paging problem

I have a new 7200S install with internal and external paging set up. Paging from any of the digital keysets works perfectly from anywhere in the building. There is a cordless phone patched into an analog port, when doing a page from that phone, there is loud feedback coming from all phones and speakers, no matter where in the building the page is made from. (The same cordless phone was used on the previous phone system with no paging problems). Anyone have any ideas as to what could be causing this or how to resolve?

Try using a common 2500 set to eliminate an issue with the cordless phone itself.

The microphone is too hot. you might try the system volume settings for the analog ports. Back in the old days we would put a "confidensor" on the transmitter. You could try a piece of tape on the mic. with a pin hole in it to test the concept.

Try the cordless phone away from from any digital phone like in another room or if there is a digital phone where you normally page take it out the page group.