sundance-communications.com Forums More-Phone & VoIP Systems Executone-Isoetec Telephones & Systems Resurrected Executone 42 System

OK, so my bosses told me to take the "old" IDS 42 out of mothballs and "power it up" for the new business.

It has gremlins.

My bosses say it had Auto Attendant capability but when I access it with my level8 password it says 'access denied' and there was never voice mail on it.

It also can answer incoming phone calls but it did for one day have dial tone to make outgoing, now it does not - just air.

In case you can help, I did put all in group 37 (presumably the auto attendant group), and the screen states version V42/84-4.0.3.

Thanks for any help,
Floyd

If it has the auto attendant feature enabled it will say that on the main programming menu screen as ATT as an option.Without that then it won't.It may be that the memory has totally defaulted from bering mothballed and you lost the download.
Are you saying that you cannot make outgoing calls?That may be because you are using trunk group keys and not all the trunks are active so you're picking up a "dead" member of the trunk group.You can assign direct keys to the sets for the lines or try dial accessing 9001,9002 etc.If you don't have the auto attendant option loaded then you should program the ringing on the sets that you want to ring.

Originally posted by pvj:
If it has the auto attendant feature enabled it will say that on the main programming menu screen as ATT as an option.Without that then it won't.

It does not.

It may be that the memory has totally defaulted from bering mothballed and you lost the download.

It was unplugged for more than two years (I found out later) and nobody could tell me that they remember that they had it.

.... not all the trunks are active so you're picking up a "dead" member of the trunk group.You can assign direct keys to the sets for the lines or try dial accessing 9001,9002 etc.

The station programming was scrambled by one of my workers, but after putting it back in order, it worked fine. Thanks for the memory jar.

If you don't have the auto attendant option loaded then you should program the ringing on the sets that you want to ring.

1) Do you know if the auto attendant option still available?

2) Where on the menu(s) do you set the ringing of the individual phones?

Thanks again.
Floyd

If you need the auto attendant feature then you must get it downloaded to the system.Look for AABLE Communications they can apparently activate features.Please note they will charge for it unless you previously have paid for it.In that case if they can find a record of you having the download before they might reload it for you but I can't guarantee that.
As for ringing it is assigned on the A screen station programming on a per station basis.Same for programming keys on the sets if you need to do that.My guess if it's been sitting for 2 years without power then the memory will have bben wiped out and that's why you no longer have the ATT feature loaded.

You should be able to get features downloaded from Aable Communications, for a fee of course.
We must have been typing at the same time.

------------------
Executone Telephone Repair
Isoetec Telephone Repair

[This message has been edited by paul144 (edited October 08, 2004).]

Thank you both for your replies and help.
Floyd

Also, if you are going to use autoattendent you need a DVA(Digital voice announcer). I woukld just program lines to ring to phones and hookup a answering machine to yhe first two lines.

Good Luck!!

JJ,
You mean I need both the digital voice announcer and the voice mail system?

I thought the voice mail system will also work with the auto attendant add-in to create both.

Sorry for my confusion, but I'm working on limited knowledge (and partial manuals) with this system.

Thanks,
Floyd

Auto attendent and voicemal are two seperate options on the IDS product line.

Auto attendent is used with DVA and for routing calls.

Voicemail (VMS) option has both auto attendent and mailbox capabilities.


To use either feature you need the download option to use them.

Good Luck!!

Just to clarify for you,
If you want to use the IDS built in auto attendant then you need the ATT option plus a DVA.
If you want to use voicemail system as voicemail and auto attendant then you need the VMS feature loaded.