|
|
|
|
Joined: Jun 2005
Posts: 2
Member
|
|
Member
Joined: Jun 2005
Posts: 2 |
Hi,
We've just had a new IVX E-Class setup with a 684 card. Five lines are connected to CO while the sixth line is connected to a front door intercom box via Viking equipment.
Because we're using CID, there is a delay of two rings between the time when someone calls and the time that it rings at the station (I don't agree that the delay is necessary at all, but I digress).
The problem is that there is also a two-ring delay when someone presses the front door intercom box. The installer says that on the IVX, CID can be enabled or disabled on a per system basis only and not on a line per line basis.
Is this true?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jul 2003
Posts: 766
Member
|
|
Member
Joined: Jul 2003
Posts: 766 |
put the door box on one of the analog ext. and program it as a door box.
|
|
|
|
|
Joined: Jun 2005
Posts: 2
Member
|
|
Member
Joined: Jun 2005
Posts: 2 |
<font face="Verdana, Arial" size="2">Originally posted by SST:
put the door box on one of the analog ext. and program it as a door box.</font> I asked the installers to do that but they said that it couldn't be done with the Viking C-1000A because it must connect to the CO line interface (it emulates a CO line apparently).
|
|
|
|
Forums84
Topics94,526
Posts640,017
Members49,852
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (Silversam),
297
guests, and
34
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
