web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
#466984 10/19/11 01:52 AM
Joined: Nov 2010
Posts: 68
Member
OP Offline
Member
Joined: Nov 2010
Posts: 68
Hey Crew-

I have an esi 200, with a PRI, however, even when I assign an outgoing caller id with a DID in the Extension setup, the outgoing caller ID still shows the Primary number in the account, I called the Provider, and they said they do not see an outgoing caller-id coming out of the switch- I've copied and pasted their findings at the bottom of the message, is there a feature I need to turn on in the system to allow this to work? Thanks

Oct 18 14:13:23 CDT: ISDN Se1/0:23 Q931: SETUP pd = 8 callref = 0x0003
Bearer Capability i = 0x8090A2
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA9838B
Exclusive, Channel 11
Called Party Number i = 0x81, '17748269539'
Plan:ISDN, Type:Unknown
.Oct 18 14:13:23 CDT: ISDN Se1/0:23 Q921: Net TX -> RR sapi=0 tei=0 nr=114

Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

#466985 10/19/11 08:18 AM
Joined: May 2005
Posts: 456
Member
Offline
Member
Joined: May 2005
Posts: 456
If this is "old-school" PRI, for me, it's always been dependent on the Central office switch whether or not they support the outgoing caller ID. Here they are mostly DMS100's which are fine. GTD-5's will not give you control over outgoing CID. If it is an older switch then they might not even have a field in the report that they get from it which would explain your results.

ESI tech support will be able to tell you if you are sending the CID. I don't know of a way to turn it off or on per-station other than leaving the field in F31 empty or full.


Brian Dunne
ETC Telecom
www.etctele.com
#466986 10/20/11 08:25 AM
Joined: Nov 2010
Posts: 68
Member
OP Offline
Member
Joined: Nov 2010
Posts: 68
Thanks Bdunne- Yeah, this is a new type of PRI through Cox- so, not sure. Even if F31 is empty, I'm pretty sure it sends out the main number of the PRI.

#466987 10/22/11 09:36 AM
Joined: Jan 2007
Posts: 393
Member
Offline
Member
Joined: Jan 2007
Posts: 393
I have hooked up some ESI to Cable PRI's they will let you push out a CID from the system as long as its a CID that is registered at that site by the cable company ie the Pilot & DID's


Avalon Services
New Jersey Voip Telephone systems voice & Data Cabling
www.avalonphones.com

Moderated by  5years&counting, nonameyet 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,697
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,100 Shoretel
187,712 CTX100 install
186,800 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 11
TDKs79 8
teleco 4
Who's Online Now
0 members (), 140 guests, and 24 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5