|
|
Joined: Aug 2009
Posts: 19
Member
|
Member
Joined: Aug 2009
Posts: 19 |
Whenever I come across a radio tie line(RTNA circuit), I'm told I should see a big capacitor kick across the pair(about 100 points with a sidekick or KS meter) and a normal capacitance kick(depends on distance to CO)one side to ground. My question is should there be ANY voltage on the line either from the D4 card in carrier or from the end equipment? This is over a regular copper pair and I should be receiving tone @-8 db and sending @0.0 db.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Jun 2007
Posts: 83
Member
|
Member
Joined: Jun 2007
Posts: 83 |
There shouldn't be any voltage. Most of the time the CO techs don't change the option on the d4 cards to disable sealing current. Leaving it on will cause a hum on the transmission.
|
|
|
|
Joined: Aug 2009
Posts: 19
Member
|
Member
Joined: Aug 2009
Posts: 19 |
Thanks,I'll make sure they check the sealing current. The one I worked on today had about 32 volts on it today on my end of the circuit. After opening and closing the smas(smash)point(test points) a few times,the voltage slowly got less and less down to 2 or 3 volts.I was told that these points can go bad which is what I suspect happened today.How much voltage would the sealing current provide?
|
|
|
|
Joined: Sep 2006
Posts: 3,290
Member
|
Member
Joined: Sep 2006
Posts: 3,290 |
Arthur P. Bloom "30 years of faithful service...15 years on hold"
|
|
|
|
Joined: Aug 2009
Posts: 19
Member
|
Member
Joined: Aug 2009
Posts: 19 |
|
|
|
Forums84
Topics94,524
Posts640,007
Members49,851
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
181
guests, and
38
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|