|
Joined: May 2001
Posts: 4
Member
|
OP
Member
Joined: May 2001
Posts: 4 |
I recently just swapped a phone out with a spare that I had... Phone works but does not ring on incoming calls and will not auto default to live line when picking up handset. possible programing? please help if you can. thank you, Paul..
AT&T Merlin 10 button, I have 4 lines and intercome...
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Mar 2001
Posts: 7,350
RIP Admin
|
RIP Admin
Joined: Mar 2001
Posts: 7,350 |
We need to know what Merlin system you have as there is different programming for different systems. dtmf
Russ runs a local service and private tech center. [/url]
|
|
|
|
Joined: May 2001
Posts: 4
Member
|
OP
Member
Joined: May 2001
Posts: 4 |
not sure wich system I have... dont see model numbers or anything like that... were should i look?
|
|
|
|
Joined: Mar 2001
Posts: 7,350
RIP Admin
|
RIP Admin
Joined: Mar 2001
Posts: 7,350 |
At the KSU, it should be in a closet or phone room. Open the front cover and it will say what model it is dtmf
Russ runs a local service and private tech center. [/url]
|
|
|
|
Joined: May 2001
Posts: 4
Member
|
OP
Member
Joined: May 2001
Posts: 4 |
It says Model 410 Does that make sense? <font face="Verdana, Arial" size="2">Originally posted by dtmf: At the KSU, it should be in a closet or phone room. Open the front cover and it will say what model it is dtmf</font>
|
|
|
|
Joined: Mar 2001
Posts: 7,350
RIP Admin
|
RIP Admin
Joined: Mar 2001
Posts: 7,350 |
Yes it does. They are controlled by dip switches on the front of the KSU, There will be a switch for each phone set(sw1=station 10 and so on)yes means ringing and no means no ring.As far as your line pick up it should come up.Make sure you don't have your slide switch in program or test it should be in the middle. dtmf
Russ runs a local service and private tech center. [/url]
|
|
|
|
Joined: May 2001
Posts: 4
Member
|
OP
Member
Joined: May 2001
Posts: 4 |
Ok they all are on yes and the phone does ring when there is a call. however when the hand set is in use and another call comes in it will not ring. the other phones in the backround will ring but not the one that is in use. the other office phone does ring properly but not the one I have been talking about. is there something that can be done? <font face="Verdana, Arial" size="2">Originally posted by dtmf: Yes it does. They are controlled by dip switches on the front of the KSU, There will be a switch for each phone set(sw1=station 10 and so on)yes means ringing and no means no ring.As far as your line pick up it should come up.Make sure you don't have your slide switch in program or test it should be in the middle. dtmf</font>
|
|
|
|
Joined: Mar 2001
Posts: 7,350
RIP Admin
|
RIP Admin
Joined: Mar 2001
Posts: 7,350 |
When you are on the phone and a call comes in you should hear one very sort ring at half volume and that should be it.
Russ runs a local service and private tech center. [/url]
|
|
|
|
Joined: Aug 2001
Posts: 1
Member
|
Member
Joined: Aug 2001
Posts: 1 |
My 410s (and I'm supporting a bunch) program differently than that.
At the instrument, push the programming slide switch down to P. Press the line button (one of the five silver tabs in a vertical row) until the green LED changes state.
If the LED is off, that line will not ring on that instrument. If the LED is blinking, it will ring on every third CO ring. If the LED is steady, it will ring with every CO ring. This needs to be programmed on every line for each instrument.
Line picking is a little different.
Switch out of and back in to programming. Press ##, then touch the lines that you want the lines to be used at that phone. The LEDs should not change.
To clarify, the lines (if available) will be used in the order selected. If the first-selected line is not available, it will use the second, etc, etc.
Hope this helps.
|
|
|
Forums84
Topics94,290
Posts638,802
Members49,767
|
Most Online5,661 May 23rd, 2018
|
|
1 members (jsaad),
133
guests, and
405
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|