web statisticsweb stats

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
#491575 06/23/12 11:41 AM
Joined: Jul 2011
Posts: 13
Member
Member
Offline
Joined: Jul 2011
Posts: 13
Customer has a bunch of old T1 cards in their IPX 3000 for their call center. They want caller ID. Century Link has added what they call "Real Time ANI". Tech support told me the only change that needed to happen is in the Trunk Group. The "incoming CLI" needed to be changed from "N" to "Y". We made the change after hours. As soon as the telco activated on their end we would get busy signals on any 800 #'s being called. The telco said that we are not set up in the phone system as *ANI*DNIS. Tech support told me we are. I don't know if it makes any difference but the trunk groups on the telco side are what they call "Super Trunks" meaning that they roll over from one to another. Anyone have any ideas on what else could need to be changed on the Tadiran side?

#491576 06/23/12 05:26 PM
Joined: Sep 2004
Posts: 4,220
Likes: 2
Member
*****
Member
*****
Offline
Joined: Sep 2004
Posts: 4,220
Likes: 2
Verify they are sending the proper *ANI*DNIS with a tester on site and have a Tadiran tech there as well. You need a vendor meet for this.

#491577 06/24/12 05:26 AM
Joined: Jul 2011
Posts: 13
Member
Member
Offline
Joined: Jul 2011
Posts: 13
What kind of tester are you referring to? (I am a Tadiran tech). Relatively new to the telco field though.

#491578 06/24/12 05:37 AM
Joined: Sep 2004
Posts: 4,220
Likes: 2
Member
*****
Member
*****
Offline
Joined: Sep 2004
Posts: 4,220
Likes: 2
Tadiran IPX/Coral or ICE? T1 tester monitoring DNIS/ANI info on the channels.

#491579 06/24/12 05:48 AM
Joined: Jul 2011
Posts: 13
Member
Member
Offline
Joined: Jul 2011
Posts: 13
System is an IPX 3000. Telco swears that they are sending *ANI*DNIS. Is there anywhere in programming that I can look to verify that is what the system is set for? Telco tells me the system is not set up for it or the calls would be coming thru.

#491580 06/24/12 06:17 AM
Joined: Sep 2004
Posts: 4,220
Likes: 2
Member
*****
Member
*****
Offline
Joined: Sep 2004
Posts: 4,220
Likes: 2
Installation manual version 15 page 377+ on trunk group programming. Channels have to be E&M you cannot have DTMF supervision disabled etc. Other things like digits expected etc might be an issue. But, all things being said it never hurts to make sure the carrier is sending the correct format.


Link Copied to Clipboard
Newest Topics
outdial message notification cuts off
by Bellhanger - 05/05/25 10:05 AM
3515 vodavi phones.
by Gary S. - 05/01/25 12:26 PM
AT&T Coinsoft
by ChrisRR - 04/30/25 02:39 PM
Inter-tel Encore CX aka Mitel 3000 circa 2008
by Telesystems - 04/27/25 02:20 PM
Forum Statistics
Forums84
Topics94,525
Posts640,013
Members49,852
Most Online5,661
May 23rd, 2018
Newest Members
Marcgyver, DEN2MM, ferhat_efe, utec, MoverDub
49,852 Registered Users
Top Posters(30 Days)
Toner 4
Who's Online Now
1 members (justbill), 265 guests, and 47 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998 - 2025
Powered by UBB.threads™ PHP Forum Software 8.0.0