|
|
Joined: Jun 2005
Posts: 64
Member
|
Member
Joined: Jun 2005
Posts: 64 |
I have two sites one has 3.0 the other has software 2.5.1x43 both have a PRI ver 1.2. I have the same carrier at both locations and Caller ID is turned on thru the carrier at both locations.
The CID option is turned on both CPU's however the site where caller id is working also has the ANI option, it is also the site with 3.0. The site with just the CID option and v2.5.1x43 doesn't.
Is it the ANI option that I need to make caller id work with 2.5.1x43 or do I need to upgrade to 3.0 as well?
Thanks in advance, Merry Xmas
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Jul 2006
Posts: 50
Member
|
Member
Joined: Jul 2006
Posts: 50 |
I found an old note stating that you do need ANI option for CID Number Only on a PRI. It's been awhile since I did one of these so maybe someone else could confirm this.
I do know that you need Eclipse 3.0 and PRI Firmware 1.3 for CID Name and Number. ANI Option is a Standard Option on Eclipse 3.0.
|
|
|
|
Joined: Jun 2005
Posts: 64
Member
|
Member
Joined: Jun 2005
Posts: 64 |
Thanks benedogg on the quick reply to my question, that sounds right and I appreciate the extra info as well, good to know.
Have a good holiday!
|
|
|
Forums84
Topics94,512
Posts639,934
Members49,844
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
210
guests, and
32
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|