sundance-communications.com/forum Forums Other TDM Phone Systems Executone-Isoetec Telephones & Systems MWI

Thank you all for your assistance. It was something really simple:

In line setup (S) screen, the 8 extensions relative to the anolog lines didn't have the following parameter set:

Use for MWI/Outdial

Put the Y/Y in there and its working now.

Huge thanks to a forum user that called me up with no prompting and talked me through the solution.

to all of you
to set up a vx3 for rs232 all you need is shutdown the voicemail all the way down to where you have 4 choices. press 2 then 1 hit your numlock key, screll down to 232 and hit enter twice. voice mail will reboot and set it self up with the right settings. all you need to do is set up S screen in the voicemail with EXT numbers that mach EXT numners that are plugged in and setup the B screen in the phone system on port one or two for RS232 for the voicemail. that is it. many people try to modify EXC run node to do 232 and that is so wrong.