|
Joined: Aug 2003
Posts: 39
Member
|
OP
Member
Joined: Aug 2003
Posts: 39 |
I have a customer who has an AXXENT the Cpu based system.
Yesterday they called and said that there original vendor came out and replaced some boards on the main system (witch boards they did not know) after changing the boards customer still could not break dial tone and there vendor said the unit would need to be replaced.
They are able to receive calls and access lines but when you try to dial dialtone is still there. Has anyone came accross this before? and is so what is the fix?
Thanks in Advance
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Aug 2001
Posts: 774
Member
|
Member
Joined: Aug 2001
Posts: 774 |
After hitting the outgoing button on the phone dial 9, then dial the number.
|
|
|
|
Joined: Aug 2003
Posts: 11
Member
|
Member
Joined: Aug 2003
Posts: 11 |
just curious about something..........
if this is your customer....then why would the original vendor come in and change boards in it??????? isnt that what you are supposed to do????
|
|
|
|
Joined: May 2001
Posts: 506
Member
|
Member
Joined: May 2001
Posts: 506 |
Not sure how close the axxent is to axxess, but you might try dialing 9200 to get an outside line and then dial your number to see if it's a programming issue.
Devin
|
|
|
|
Joined: Aug 2003
Posts: 39
Member
|
OP
Member
Joined: Aug 2003
Posts: 39 |
customer get's dial tone they press outgoing and when trying to press any digit you continue to hear dial tone.
Circuitsbizy They are a new customer they were unhappy with the service from original vendor that came out to replace the boards.
Thanks for your replys I'm going out to customers tomorrow to replace their system im going to bring the old one back to see what the problem could be.
|
|
|
|
Joined: Mar 2001
Posts: 7,350
RIP Admin
|
RIP Admin
Joined: Mar 2001
Posts: 7,350 |
WhiteStar, Can't break dial tone. Couple of things to check. Make sure CO trunk and CO circuit use the same type signaling (DTMF or Pulse). Also check the DTMF Digit Duration/Pause timer setting to see if it's compatible with the trunk.
Also a bad trunk card or CPU will cause this .
[This message has been edited by dtmf (edited August 25, 2003).]
Russ runs a local service and private tech center. [/url]
|
|
|
|
Joined: Aug 2003
Posts: 39
Member
|
OP
Member
Joined: Aug 2003
Posts: 39 |
Thanks dtmf Ill try that and if/when I find the fix Ill post it
I am still open to any suggestions
|
|
|
|
Joined: Aug 2001
Posts: 774
Member
|
Member
Joined: Aug 2001
Posts: 774 |
Of course check dial tone with a butt set before removing system to make sure you can break dial tone. Tho I am sure you know that.
|
|
|
Forums84
Topics94,297
Posts638,867
Members49,769
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
112
guests, and
337
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|