|
|
|
|
Joined: Sep 2005
Posts: 6
Member
|
|
Member
Joined: Sep 2005
Posts: 6 |
I have purchased the PAL chip *827.8877 and installed it in my T1/E1 Card in the appropriate socket. Where is the interface to configure this card, hunt groups etc..if there is one ? I have system 8.2, but my warranty tech support is almost impossible to get a straight answer out of. Any help greatly appreciated.
------------------
Novus Ordo Seclorum
Novus Ordo Seclorum
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Sep 2005
Posts: 6
Member
|
|
Member
Joined: Sep 2005
Posts: 6 |
I should mention that we are switching to a PRI circuit from a Hybrid circuit. I have the T1 line from my phone box (4 wires no smart jack at all) Plugged into the t1/e1 span port. I should also mention this is my first time configuring anything other than polycom, or cisco and I am lost. TIA for any help
------------------
Novus Ordo Seclorum
Novus Ordo Seclorum
|
|
|
|
|
Joined: Sep 2005
Posts: 6
Member
|
|
Member
Joined: Sep 2005
Posts: 6 |
Oh and im currently getting a green on line light and a Blue alarm
------------------
Novus Ordo Seclorum
Novus Ordo Seclorum
|
|
|
|
|
Joined: Nov 2001
Posts: 2,500
Member
|
|
Member
Joined: Nov 2001
Posts: 2,500 |
"I have purchased the PAL chip *827.8877 and installed it in my T1/E1 Card in the appropriate socket. Where is the interface to configure this card, hunt groups etc..if there is one ? I have system 8.2, but my warranty tech support is almost impossible to get a straight answer out of. Any help greatly appreciated."
**The programming software is something your vendor has, and its needed to program your T1 card.
"I should mention that we are switching to a PRI circuit from a Hybrid circuit. I have the T1 line from my phone box (4 wires no smart jack at all) Plugged into the t1/e1 span port. I should also mention this is my first time configuring anything other than polycom, or cisco and I am lost. TIA for any help"
**Not sure what exactly you mean here but is this a new T1 install or are you upgrading an existing T1 to a PRI? In any case the T1 card has a built-in CSU so you would plug directly in to it.
"Oh and im currently getting a green on line light and a Blue alarm"
**Need to configure the T1 card in programming to sync it up.
Rhett
|
|
|
|
Forums84
Topics94,518
Posts639,981
Members49,850
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
140
guests, and
26
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
