|
|
Joined: Oct 2012
Posts: 1
Member
|
|
Member
Joined: Oct 2012
Posts: 1 |
sx-200 analog/digital cabinet seems has lost DTMF.Can receive calls & dials out but very slow.
I have check the line polarity it seems fine.
Any help?
Thanks in advance.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jul 2006
Posts: 2,766 Likes: 22
Admin
|
|
Admin
Joined: Jul 2006
Posts: 2,766 Likes: 22 |
I'd be checking the DTMF receivers as it's fairly unlikely that you've had the programming change to pulse dialing. They are the cards with the blue tabs.
After that, I'd be looking at some external event, like the telco hates you.
Carl
Last edited by Carl Navarro; 10/06/12 05:54 AM.
This model is end of life
|
|
|
|
|
Joined: Aug 2005
Posts: 2,125
Member
|
|
Member
Joined: Aug 2005
Posts: 2,125 |
Have you tested DTMF dialing at the Demarc?
Have you checked your receivers?
Have you checked trunk circuit descriptors?
Have you asked the users if anyone's been messing with the PBX lately?
|
|
|
|
|
Joined: Dec 2005
Posts: 7,056
RIP Moderator-Mitel, Panasonic
|
|
RIP Moderator-Mitel, Panasonic
Joined: Dec 2005
Posts: 7,056 |
Put your thinking hats back on. this is a 1000-1006 combo of digital and analog shelves. ( Re: old sx-200 (analog/digital) trunk has no DTMF dialing) I'd almost bet that it's in the process of crashing for the last time. 
When I was young, I was Liberal. As I aged and wised up, I became Conservative. Now that I'm old, I have settled on Curmudgeon.
|
|
|
|
|
Joined: May 2005
Posts: 1,006
Member
|
|
Member
Joined: May 2005
Posts: 1,006 |
I don't think there were any dip-switches on the trunk cards for dtmf vs. dial pulse. I remember there was programming the trunk "type" as dial pulse, dtmf, etc. I think 1311 for the trunk type was the correct setting. Why they would have changed is puzzeling. Time to dig out my books out of the garage.
|
|
|
|
|
Joined: May 2005
Posts: 1,006
Member
|
|
Member
Joined: May 2005
Posts: 1,006 |
Here it is- trunk group programming-1331= no supervision,smdr withoutmessege register,touch tone dial office, central office. Hope you have an overlay and know how to get into programming. Wait that's for the old straight analog! Gotta keep digging....
|
|
|
|
|
Joined: May 2005
Posts: 1,006
Member
|
|
Member
Joined: May 2005
Posts: 1,006 |
The only reference to dtmf or pulse would be in the trunk circuit descriptor (Form 13) for the T-1.
|
|
|
|
|
Joined: Jul 2006
Posts: 2,766 Likes: 22
Admin
|
|
Admin
Joined: Jul 2006
Posts: 2,766 Likes: 22 |
Now I'm confused. "old" SX-200 means Generic 217 and earlier. "Intermediate" SX-200 means 200D generic 1001-100x. "New" means 200/ML/EL Lightware 1x, not to be confused with 200-ICP.
So, if 200 Digital then which trunk cards? You still can have 9110's or whatever they were.
This model is end of life
|
|
|
|
|
Joined: Aug 2005
Posts: 2,125
Member
|
|
Member
Joined: Aug 2005
Posts: 2,125 |
Good point. The Analog/Digitals were kind of a Frankenstein's Monster.
And as LH said... It may be going down for the last time. An upgrade is in order.
|
|
|
|
|
Joined: Dec 2005
Posts: 7,056
RIP Moderator-Mitel, Panasonic
|
|
RIP Moderator-Mitel, Panasonic
Joined: Dec 2005
Posts: 7,056 |
tdpandya we need a little response here. If you want any more assistance, let us know. If you got it fixed, we'd STILL like to know. And what fixed it. Someone might respond via PM, except that your profile is LACKING.
Last edited by Lightninghorse; 10/09/12 06:21 PM.
When I was young, I was Liberal. As I aged and wised up, I became Conservative. Now that I'm old, I have settled on Curmudgeon.
|
|
|
|
Forums84
Topics94,526
Posts640,016
Members49,852
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
165
guests, and
63
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
