|
|
|
|
Joined: Dec 2009
Posts: 105
Member
|
|
Member
Joined: Dec 2009
Posts: 105 |
I need to add analog ports to an Option 11 system.
There seems to be several cards available, I need less than 8 ports, any recommendations?
Also what is the procedure to add a card?
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Nov 2008
Posts: 299
Member
|
|
Member
Joined: Nov 2008
Posts: 299 |
Do you need message waiting lamps?
The most common card for analog extensions is the NT8D03, a quad density pack offering 16 ports...I don't think there are any 8 port or smaller cards for an option 11.
Dylan. SATUBAW (Some American techs use BIX as well)!
|
|
|
|
|
Joined: Aug 2004
Posts: 9,172 Likes: 22
Admin
|
|
Admin
Joined: Aug 2004
Posts: 9,172 Likes: 22 |
I've installed hundreds of these systems and have never seen an NT8D03 although they do exist. I always installed the 16 port NT8D09XX analog with message wait support.
|
|
|
|
|
Joined: Dec 2009
Posts: 105
Member
|
|
Member
Joined: Dec 2009
Posts: 105 |
Thanks for the info, do not need MW but the 09 cards have availability.
Is this a power down, stick the card in and reboot?
Can you provide the LDs that I need to program to get a PRI DID number to ring at an analog port?
|
|
|
|
|
Joined: Aug 2004
Posts: 9,172 Likes: 22
Admin
|
|
Admin
Joined: Aug 2004
Posts: 9,172 Likes: 22 |
No need to power down- just insert the card and program the ports. The ringing programming is site dependent- some sites require digit manipulation and some don't.
|
|
|
|
|
Joined: Nov 2008
Posts: 299
Member
|
|
Member
Joined: Nov 2008
Posts: 299 |
I've installed hundreds of these systems and have never seen an NT8D03 although they do exist. I always installed the 16 port NT8D09XX analog with message wait support. Too funny...I can't say I've installed hundreds of these, but I can count on one hand the number of them that have had message waiting, and all of those have been in lodging.
Dylan. SATUBAW (Some American techs use BIX as well)!
|
|
|
|
|
Joined: Aug 2004
Posts: 9,172 Likes: 22
Admin
|
|
Admin
Joined: Aug 2004
Posts: 9,172 Likes: 22 |
Maybe it's a regional thing... 
|
|
|
|
|
Joined: Jan 2002
Posts: 2,328
Moderator-Comdial
|
|
Moderator-Comdial
Joined: Jan 2002
Posts: 2,328 |
|
|
|
|
|
Joined: Sep 2006
Posts: 99
Member
|
|
Member
Joined: Sep 2006
Posts: 99 |
Put your card in an IPE slot then.....
LD 20
Req: new
Type: cardslt L S C (for analog) or
Type: cardmlt L S C (for digital)
After you do this
LD 20
Req: LUVU
Type: 500 (analog units)
This will show you your new TN's for the card you just installed.
As the great Bob once said, "Its a SWITCH its either OFF or its ON!"
|
|
|
|
Forums84
Topics94,512
Posts639,934
Members49,844
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (justbill),
140
guests, and
37
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
![[Linked Image]](https://sundance-communications.com/forum/images/559.jpg)
