Opt. 11 Analog card|Sundance Business VOIP Telephone Help

Print Thread

Rate Thread

Opt. 11 Analog card #546281 02/20/13 12:05 PM
Joined: Dec 2009 Posts: 105 SC Rod T OP Member
OP Rod T Member Joined: Dec 2009 Posts: 105 SC	I need to add analog ports to an Option 11 system. There seems to be several cards available, I need less than 8 ports, any recommendations? Also what is the procedure to add a card?

Nortel Phone System Service

Nortel Phone System Service in Canada

Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.

Re: Opt. 11 Analog card Rod T #546325 02/20/13 06:20 PM
Joined: Nov 2008 Posts: 299 Waupun, WI SwedaGuy Member
SwedaGuy Member Joined: Nov 2008 Posts: 299 Waupun, WI	Do you need message waiting lamps? The most common card for analog extensions is the NT8D03, a quad density pack offering 16 ports...I don't think there are any 8 port or smaller cards for an option 11. Dylan. SATUBAW (Some American techs use BIX as well)!

Re: Opt. 11 Analog card Rod T #546328 02/20/13 06:51 PM
Joined: Aug 2004 Posts: 9,159 Likes: 17 SOUTH TEXAS RATHER BE FISHING Admin
RATHER BE FISHING Admin Joined: Aug 2004 Posts: 9,159 Likes: 17 SOUTH TEXAS	I've installed hundreds of these systems and have never seen an NT8D03 although they do exist. I always installed the 16 port NT8D09XX analog with message wait support.

Re: Opt. 11 Analog card RATHER BE FISHING #546355 02/21/13 09:32 AM
Joined: Dec 2009 Posts: 105 SC Rod T OP Member
OP Rod T Member Joined: Dec 2009 Posts: 105 SC	Thanks for the info, do not need MW but the 09 cards have availability. Is this a power down, stick the card in and reboot? Can you provide the LDs that I need to program to get a PRI DID number to ring at an analog port?

Re: Opt. 11 Analog card Rod T #546386 02/21/13 06:52 PM
Joined: Aug 2004 Posts: 9,159 Likes: 17 SOUTH TEXAS RATHER BE FISHING Admin
RATHER BE FISHING Admin Joined: Aug 2004 Posts: 9,159 Likes: 17 SOUTH TEXAS	No need to power down- just insert the card and program the ports. The ringing programming is site dependent- some sites require digit manipulation and some don't.

Re: Opt. 11 Analog card RATHER BE FISHING #546391 02/21/13 08:05 PM
Joined: Nov 2008 Posts: 299 Waupun, WI SwedaGuy Member
SwedaGuy Member Joined: Nov 2008 Posts: 299 Waupun, WI	Originally Posted by RATHER BE FISHING I've installed hundreds of these systems and have never seen an NT8D03 although they do exist. I always installed the 16 port NT8D09XX analog with message wait support. Too funny...I can't say I've installed hundreds of these, but I can count on one hand the number of them that have had message waiting, and all of those have been in lodging. Dylan. SATUBAW (Some American techs use BIX as well)!

Re: Opt. 11 Analog card SwedaGuy #546392 02/21/13 08:17 PM
Joined: Aug 2004 Posts: 9,159 Likes: 17 SOUTH TEXAS RATHER BE FISHING Admin
RATHER BE FISHING Admin Joined: Aug 2004 Posts: 9,159 Likes: 17 SOUTH TEXAS	Maybe it's a regional thing...

Re: Opt. 11 Analog card RATHER BE FISHING #546404 02/22/13 09:00 AM
Joined: Jan 2002 Posts: 2,328 Harlingen, TX jwooten Moderator-Comdial
jwooten Moderator-Comdial Joined: Jan 2002 Posts: 2,328 Harlingen, TX	DN availability?

Re: Opt. 11 Analog card Rod T #547739 03/14/13 08:48 AM
Joined: Sep 2006 Posts: 99 Chattanooga,TN HutchComm Member
HutchComm Member Joined: Sep 2006 Posts: 99 Chattanooga,TN	Put your card in an IPE slot then..... LD 20 Req: new Type: cardslt L S C (for analog) or Type: cardmlt L S C (for digital) After you do this LD 20 Req: LUVU Type: 500 (analog units) This will show you your new TN's for the card you just installed. As the great Bob once said, "Its a SWITCH its either OFF or its ON!"

Moderated by MooreTel

Hop To

Link Copied to Clipboard

atcomsystems.ca/forum Forums TDM Business Telephone Systems Nortel Telephones & Systems Opt. 11 Analog card