sundance-communications.com/forum Forums TDM Business Telephone Systems NEC Telephones & Systems remote connect to sv8100 behind router

I have sv8100 behind Linksys rv042 router as I try to access the sv8100,not getting successful. I havd try port fwd on port 80 and 8000.and on any brower I type in the ip address of the router follow by:80. can not get in.anyone has any idea?

Login into your Rv042 router
Go to Setup
Click forwarding
look for Port Range forwarding
select Service 'HTTP [TCP/80-80]' service
in the ip address box send it to you KSU IP
click the enable box
then click add to list.
click save at the bottom.

For the PC pro connect
stay in the same screen under port forwarding
click Service Management
service name can be whatever you want. I call mine PC PRO
Protocol is TCP
port is 8000 to 8000
click add to list
click ok
select Service 'PC PRO [TCP/8000 - 8000' service
in the ip address box send it to your internal KSU IP
click the enable box
then click add to list.

click save at the bottom.

If you can't access it externally, make sure you can plug in to the RV042 and access it with the same IPs. I use the same hardware for my SV8100.

Thanks, Nextcool.
what do i need to type in the webbrowser?
the ip address of the rv042 follow by:80?

FYI

NEC highly recommends to change ports 80 and 8000 along with all default user names and passwords.

Hackers now know the default ports, user names and passwords.

you should have real IP then you need to make port forwarding on your router