sundance-communications.com/forum Forums TDM Business Telephone Systems Samsung Telephones & Systems SVMI-20 issue

Good day all,i have configured a Samsung OS7200 with a SVMI-20 to automatically(mmc 507)change between day and night mode,this works fine except that the system goes from night to day about 3 hours before the scheduled time,any idea why this happens,system has MP20 with version 4.70 software,system time is correct and no alarms(mmc 851) appear.

Send a copy of the config in PM and I'll have a look.

Trick for new comer RP2 override RP1 only, RP3 override RP2 and RP1 etc etc.

Trick 2 start time and end time to some people seem ass about.

Remember its 24hr time not 12hr

I always set RP1 as Night Start 0001 end 2359
then RP 2 typically as day mon - fri start 0900 end 1700
use RP 3 for Lunch mon - fri start 1200 end 1300

If rp 2 and 3 where swapped Lunch would never happen as RP 3 override RP2

etc etc

thank you for your reply,i changed it to the way you typically set it up,will see tomorrow morning.

Let me know how it goes

issue resolved,thanks