|
|
|
|
Joined: Feb 2014
Posts: 3
Member
|
|
Member
Joined: Feb 2014
Posts: 3 |
Have been running a system nicely with some NT136's but have just tried to add a couple of NT321's and although the phones register with the PBX they come back with "Check PBX Ver"
Currently the card has firmware from 2005 V1.001/1.011.
Can anyone email me later versions of PIPEXT & PVOIPEX or point me to a URL where I can download please ?
Thanks Peter
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: May 2003
Posts: 2,924
Member
|
|
Member
Joined: May 2003
Posts: 2,924 |
I think it means PBX software, IE what version is CPU.
|
|
|
|
|
Joined: Jan 2007
Posts: 2,125 Likes: 4
Admin
|
|
Admin
Joined: Jan 2007
Posts: 2,125 Likes: 4 |
you will need to upgrade both the system and the ipext16 card
this firmware is only available through Panasonic or your Panasonic distributor/dealer
“I have not failed. I've just found 10,000 ways that won't work.”
|
|
|
|
|
Joined: Feb 2014
Posts: 3
Member
|
|
Member
Joined: Feb 2014
Posts: 3 |
Yes it needs both but I am already running the latest version in the pbx V5.0.1.2 the same as that working on an IP convergence PBX we are supporting . The NT321's register and work fine on the IP convergence PBX so it seems that with the NT136's working fine it is just the two later firmware files. I was hoping someone could help me with them as I am not a Panasonic engineer.
|
|
|
|
|
Joined: Jun 2006
Posts: 211
Member
|
|
Member
Joined: Jun 2006
Posts: 211 |
Unfortunately I think what you are requesting is beyond the scope of this board. You'll need to get a qualified installer to help you with this. If you can tell us where you are, I'm sure we can point you to a good one in your area.
Last edited by TA in KC; 02/12/14 09:07 PM.
|
|
|
|
|
Joined: Feb 2014
Posts: 3
Member
|
|
Member
Joined: Feb 2014
Posts: 3 |
Thanks for the input I have managed to download a version 3 firmware and will load it and see what happens.
|
|
|
|
|
Joined: Jan 2007
Posts: 2,125 Likes: 4
Admin
|
|
Admin
Joined: Jan 2007
Posts: 2,125 Likes: 4 |
Be careful you could end up defaulting the system
“I have not failed. I've just found 10,000 ways that won't work.”
|
|
|
|
Forums84
Topics94,525
Posts640,011
Members49,852
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
152
guests, and
36
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
