|
|
|
|
Joined: Jul 2008
Posts: 49
Member
|
OP
Member
Joined: Jul 2008
Posts: 49 |
Hi guys
Was installing a brand new 7400 v4.70 with an Svmi-20i today. But I could not log on via hyperterm with my 'Cisco' lead. This usually works on the 20e but this is my first dealing with a 20i. Is there a new way to connect to the card? I have seen the svmi options on the DM tool but every time I click on it it says check connection to DM? If someone could point me in the right direction I would really appreciate it.
Thanks
Mike
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jun 2005
Posts: 574
Member
|
|
Member
Joined: Jun 2005
Posts: 574 |
You don't need to you can use dm tool to program voicemail if you have svmi20i
you need to make sure you have ip addy for svmi and is range in whitelist?
|
|
|
|
|
Joined: Jul 2008
Posts: 49
Member
|
|
OP
Member
Joined: Jul 2008
Posts: 49 |
Hi Gerrya
Thanks for your reply, i have set the ip address of the svmi 20i as 192.168.1.205. The ip address of the system is 192.168.1.204. When i try and click on MClass for expample the page says downloading and hangs for 10s then says check connection from DM tool to system. What am i missing here? Thanks again
|
|
|
|
|
Joined: Nov 2009
Posts: 602
Samsung Moderator
|
|
Samsung Moderator
Joined: Nov 2009
Posts: 602 |
You have to add your PC into the management whitelist.
|
|
|
|
|
Joined: Apr 2011
Posts: 200
Member
|
|
Member
Joined: Apr 2011
Posts: 200 |
Add your both IP addresses in whitelist in MMC 875
Salman
|
|
|
|
Forums84
Topics94,283
Posts638,765
Members49,764
| |
Most Online5,661
May 23rd, 2018
|
|
|
2 members (dexman, justbill),
139
guests, and
237
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
